Kenmore C877.15 - Regulating Pressure

through eye of the needle Fig. 10 (H).
Draw about
2"
of thread through the
eye
of the needle with which to commence sew-
ing. Hold
needle thread in your left hand,
turn balance wheel
towards you until needle
moves
up and down, and up again
to its
highest
point, catchiijg the bobbin
thread,
which will be brought up that way
through
the hole in
the thread plate.
TO REGULATE
THE PRESSURE
For darning and
embroidering,
release the
pressure
by pressing down
the automatic
darning
lever
'A' Figure 9. Make
sure the
Presser
Foot
is down when releasing
the
pressure.
For ordinary sewing
-reset
the
pressure
bjj pressing
down on
*B'
figure
9.
To increase
the pres-
sure
press down
on
'B* Figure
9 until
the
desired pressure
is
obtained.
Ther6
should
be
jus't
enough
pressure
on
the
foot
to
allow
the fabric
to move
easily
and to
prevent
it
from rising
with
the
needle.
B
Fig-
9
9
J