To Next PageTo Next PageHow to prevent premature tank failure in Kenmore POWER MISER 12 153.331472?
To prevent premature tank failure (leakage) due to thermal expansion, a properly sized thermal expansion tank should be installed on all closed systems. This will control the harmful effects of thermal expansion.
General| Brand | Kenmore |
|---|---|
| Model Number | 153.331472 |
| Type | Electric Water Heater |
| Tank Capacity | 40 gallons |
| Voltage | 240 V |
| Wattage | 4500W |
| Warranty | 12 years |
General safety warnings and hazard definitions for water heater installation and operation.
Definitions of key terms like Qualified Technician, Service Agency, and Gas Supplier.
A checklist to ensure proper water heater location, combustion air, ventilation, and piping.
Step-by-step guide for safely disconnecting and removing the existing water heater.
Guidelines for selecting a suitable and safe installation site for the water heater.
Instructions for connecting the water heater to the natural gas or LP gas supply.
Procedures for correctly installing the vent pipe system for safe exhaust gas removal.
Guidance on connecting water lines to the water heater, including required fittings.
Instructions for installing expansion tanks and temperature/pressure relief valves.
Detailed steps for safely lighting the pilot and main burner.
How to adjust the thermostat for safe and efficient water temperature.
Procedures for cleaning the tank sediment and inspecting the venting system.
Guidelines for inspecting and cleaning the water heater's burner assembly.
Steps for safely draining and flushing the water heater tank.
Procedures for replacing parts like the filter, thermocouple, and gas control valve.
Common issues encountered during initial water heater startup.
Diagnosing and resolving problems related to condensation and unusual water odors.
Identifying potential sources of water leaks around the water heater.
