EasyManuals Logo

Kenmore Stratus DS1020 User Manual

Kenmore Stratus DS1020
49 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
EMPTYING DUST CUP AND CLEANING FILTER
4. Remove the non-woven filter from the
filter basket. With a soft and dry brush,
clean any accumulated debris from the
side screens of the filter and the filter
basket.
5. After repeated use, it may be necessary
to wash the filter basket and filter. First
brush loose debris from both basket and
filter, then hand wash basket and filter in
warm water and rinse with clean water.
After washing, set aside and allow to air
dry for 24 hours.
NOTE:
Do not scrub the non-woven
filter.
IMPORTANT:
The filter basket and
filter must be completely dry before reuse.
6. Insert the clean, dry filter into the
basket and fit the basket into the dust
cup ensuring an air tight seal is formed
around the dust cup opening.
7. Reconnect the dust cup to the hand
vacuum. To do so, position the locking
tab on the handheld unit within the
locking groove located on the bottom of
the dust cup. Press the other end of the
dust cup into position until you hear a
click’.
- 13 -

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenmore Stratus DS1020 and is the answer not in the manual?

Kenmore Stratus DS1020 Specifications

General IconGeneral
BrandKenmore
ModelStratus DS1020
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals