- 9 -
2. Plug the charging adapter into a wall
outlet.
3. While the vacuum cleaner is being
charged, the battery charging indicator
will flash continuously.
4. When the vacuum cleaner has been fully
charged (100%), the battery charging
indicator will turn off.
5. Make sure the vacuum cleaner is fully
charged before using for the first time.
The vacuum cleaner may take up to
5.5 hours to charge completely if fully
discharged.
6. The vacuum cleaner can also be charged
directly in hand vacuum mode. While
charging in hand vacuum mode, the power
switch will flash continuously. When the
hand vacuum has been fully charged, the
power switch will stop flashing and the
light will turn off.
Battery Charging Indicator
CHARGING
NOTE:
If the battery charging indicator
or the power switch does not illuminate
when charging, ensure that:
• The charging plug is plugged into the
power supply properly.
• The electrical supply at the outlet is
powered on.
• The charging adapter is fully inserted into
the charging port.
NOTE:
Never charge the vacuum cleaner
in temperatures above 104°F (40°C) or
below 39.2°F (4°C). It is normal for the
charger to become warm when charging.
Power
Switch
7. Disconnect the charging adapter from the
power supply. Remove the charging adapter
from the vacuum cleaner.
To Next Page
Loading...
Need help?
General
