9
BEFORE RIDING
Your new bicycle was assembled and tuned in the factory and then partially disassembled
for shipping. The following instructions will enable you to prepare your bicycle for years of
enjoyable cycling. For more details on inspection, lubrication, maintenance and adjustment
of any area please refer to the relevant sections in this manual. If you have questions about
your ability to properly assemble this bicycle, please consult a professional bicycle
mechanic before riding.
TO AVOID INJURY, THIS PRODUCT MUST BE PROPERLY ASSEMBLED
BEFORE USE. WE STRONGLY RECOMMEND THAT YOU REVIEW THE
COMPLETE ASSEMBLY GUIDE AND PERFORM CHECKS SPECIFIED IN THE
OWNER’S MANUAL BEFORE RIDING.
Tools required for assembly:
• 5/6mm hex wrench
• Torque wrench
• Air pump & tire gauge to inflate tires
• Bicycle lubricant or grease
• 6” adjustable wrench
• Phillips & standard screwdrivers
• Pliers with cable cutting ability
###
Serial Number Location
Bike Shown Upside Down
Serial Number
RECORD SERIAL NUMBER
Each bicycle has a serial number stamped into the bottom of the frame (See Illustration).
Record this number HERE to keep for future reference.
This number can be helpful to reclaim your bike if
ever lost or stolen. THIS INFORMATION IS ONLY
AVAILABLE ON THE BIKE ITSELF. There is no
record of your serial number at the store
purchased or with our company. It is your
responsibility to record this information.
Serial Number: __________________________
To Next Page
Loading...
