Kentec Electronics Sigma CP K Series User Manual

Kentec Electronics Sigma CP K Series Specifications

General

Brand	Kentec Electronics
Model	Sigma CP K Series
Category	Control Panel
Language	English

Summary

Technical Specification

Using Intrinsically Safe Barriers

Connecting to the Circuit Board

Detection Zone Wiring

Sounder Circuit Wiring

Connection to Repeater Panels

Connection to Ancillary Boards

Connection to 8 Way Sounder Boards

Panel Operation

16.2 Fire condition

Details the panel's response to a fire condition, including LED indicators, relays, and sounder operation.

16.3 Silence/sound alarms

16.4 Reset

16.10 Disablements

Configuration Options

Watchdog Reset Switch

Processor Reset Switch

Internal Indications – Troubleshooting

20.1 Mains fail

Indicates loss of AC supply and system running on standby batteries.

20.2 Batt fail

Indicates battery disconnection or charging circuit failure.

20.3 CPU fault

Indicates the central processor unit failure and the need for watchdog reset.

20.4 Aux 24V fault

Indicates the Aux 24V supply fuse has operated due to overload.

20.5 Batt low

Indicates low battery voltage when running on batteries.

20.6 Earth fault

20.7 Sys fuse fault

20.8 S1 fault and S2 fault

20.9 Comms fault

Power Supply

Maintenance