Need help?Do you have a question about the Kentec Electronics Syncro and is the answer not in the manual?
General| Brand | Kentec Electronics |
|---|---|
| Model | Syncro |
| Category | Control Panel |
| Language | English |
Details controls available at Access Level 1 for panel operation.
Describes functions of Lamp Test, Silence Buzzer, More Fires, and More Events buttons.
Explains menu navigation, password entry, and help functions.
Covers Silence Alarm, Re-sound Alarm, and Reset button functions.
Explains the use of Function 1 and Function 2 buttons.
Describes panel indicators, sounders, and actions during a fire event.
Details fault indicators, buzzer, and actions during a system fault.
Explains pre-alarm indication, buzzer, and investigation of the source.
Describes panel indicators, sounders, and actions during an evacuation event.
Details alert event sounder pulsing, buzzer, and silencing procedures.
Allows disabling of outputs, zones, or individual addresses.
Displays connected devices, their type, zone, location, and analogue values.
Puts individual zones into a Test Mode for one-man testing.
Used to set the panel date and time for accurate event logging.
Shows devices approaching maintenance fault limits due to contamination.
Used to enter the access 3 password for engineering functions.
To Next Page
