Need help?Do you have a question about the Kentec Electronics Taktis and is the answer not in the manual?
General| Brand | Kentec Electronics |
|---|---|
| Model | Taktis |
| Category | Control Panel |
| Language | English |
Describes the normal operating state of the fire control panel without active events.
Indicates a fire alarm or fire drill condition, with intermittent buzzer and output relay activation.
Flashes when fault conditions exist, accompanied by other fault LEDs.
Indicates internal circuit problems with continuous buzzer and flashing LED.
Indicates a fault condition on the main or backup power supplies.
Indicates parts of the system have been manually disabled and are inactive.
Signals detectors near alarm limits, indicating an imminent fire alarm condition.
Signals transmission to remote equipment or confirmation signals received.
Indicates disabled remote transmission or fault in the transmission path.
Indicates one or more zones have been selected for Test Mode.
Shows sounders are delayed during a fire condition, with flashing LED and buzzer.
Lights for disabled sounders/circuits, flashes for sounder faults.
Indicates power is being supplied to the fire control panel.
Describes different levels of user access for panel operations and available commands.
Details illuminated LED indicators for Zone 12, Fire Routing On, and Power On during a fire.
Displays the interface for entering credentials to access panel controls.
Explains the command to quiet internal buzzer and network sounders.
Explains the command to re-sound the internal buzzer and external sounders.
Describes clearing latching inputs and restoring the panel to normal.
Details pressing the Logout button to exit User Level 2.
Illustrates the menu path for navigating User Level 2 of the fire control panel.
Provides fields to record emergency contact information for assistance.
To Next Page
