EasyManua.ls Logo

Kentucky Junior - Hanger Cover-Serger

Default Icon
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
4-H Apparel and TextilesSewing
18 U. S. C. 707
4JD-01PB
University of Kentucky - Cooperative Extension Service - College of Agriculture
Materials Required:
 yard firmly woven fabric, such as
polished cotton, chintz, or quilted
Paper pattern
Metal or plastic hanger
Regular or decorative thread, such as
pearl (cotton, rayon, acrylic), texturized,
or ribbon thread. (Decorative thread can
be used in both the upper and lower
loopers.)
Equipment Required:
Serger
Dressmaker’s shears
Dressmaker’s pins and pin cushion
Pencil and paper to make pattern
Seam sealant (optional)
This simple project teaches serger skills and includes straight edge nishing and curved
seams.
Cutting Instructions:
1. Make a paper pattern by tracing around
a metal or plastic hanger.
2. Add 1 inch all the way around pattern.
3. Grainline should be parallel to the lower
edge of the hanger (and cover).
4. Fold fabric on grain. Pin pattern
through both fabric layers, and cut out.
Sewing Instructions:
1. On each piece, serge upper and lower
straight edges, trimming off a hair as
you serge (Figure A).
Figure A
Hanger Cover —
Serger
Practice Project—Junior Unit III
Top It O