To Next PageTo Next Page
Need help?Do you have a question about the Kenwood 1070VR and is the answer not in the manual?
General| Power Output | 100 Watts per channel into 8Ω (stereo) |
|---|---|
| Tuning range | FM, MW |
| Input Sensitivity | 2.5mV (MM), 200mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Video Connections | Composite |
| Dimensions | 440 x 143 x 303mm |
Initial power connection, voltage selection, and unpacking procedures.
Critical warnings for safe operation, preventing shock, fire, and damage.
Procedure to check unit condition and accessories after opening the package.
Features highlighting surround sound modes for immersive audio.
Explains advanced surround sound formats for enhanced audio playback.
Introduces digital signal processing for creating various acoustic environments.
Details the remote's capability to control multiple audio/video components.
Enables automatic execution of a series of operations.
Allows updating the remote for new components not in the setup code list.
Identifies and describes all controls, buttons, and indicators on the receiver's front panel.
Guide for connecting AM/FM antennas to ensure optimal radio signal reception.
Instructions for linking various audio sources such as CD players and record players.
Diagrams and steps for connecting video sources like VCRs, TVs, and tuners.
Explains system control cord connections for KENWOOD component integration.
Detailed guide on speaker terminal connections, including banana plugs.
Information on using pre-out jacks for external power amplifiers.
Instructions for loading batteries and understanding the remote's operating distance.
Steps to configure speaker levels and delay times for optimal surround effects.
Guide to selecting and adjusting DSP effects like Effect Level, Wall Type, and Room Size.
Procedure to adjust input signal levels when the LEVEL INDICATOR is active.
Basic steps to power on, select speakers, and play audio from any connected source.
Covers tone controls, loudness, and muting functions for sound customization.
Bypasses audio processing for a pure, direct signal path to the amplifier.
Instructions for private listening using headphones, disconnecting speakers.
Enables pairing video input with 6-channel audio input for enhanced surround.
Guide on connecting and using an external graphic equalizer.
Steps to set input, select band, tuning method, and find desired radio stations.
Directly tune radio stations by entering their specific frequency numbers.
How to store favorite radio stations for quick access via memory functions.
Method to select stored radio stations using numeric input.
Sequentially scan through preset stations using the P.CALL function.
Overview of Dolby Pro Logic, Dolby 3 Stereo, and DSP modes for audio enhancement.
Achieve theater-like surround sound from compatible video and LD software.
Creates a panoramic front sound field with clear dialogue positioning.
Adds atmospheric sound fields like Arena, Jazz Club, or Stadium to any audio source.
Guides on selecting and engaging surround sound modes for playback.
Indicators for low battery and instructions for replacement to preserve settings.
Procedure to program the remote to control external devices like TVs and VCRs.
How to control connected KENWOOD components using the system remote.
Method to switch the remote's control mode without altering the receiver's input.
Guide to planning and programming sequences of commands for automated actions.
How to initiate programmed MACRO sequences for simplified component control.
Instructions for managing setup codes, including deletion and verification.
Process to update the remote's component compatibility via telephone.
Special codes for controlling devices that do not use infrared signals.
List of setup codes for various VCR manufacturers.
List of setup codes for various TV manufacturers.
List of setup codes for various satellite receiver manufacturers.
List of setup codes for various LD player manufacturers.
List of setup codes for various DSS receiver manufacturers.
List of setup codes for various DVD player manufacturers.
List of setup codes for various cable box manufacturers.
List of setup codes for various CD player manufacturers.
List of setup codes for various DAT deck manufacturers.
List of setup codes for various cassette deck manufacturers.
List of setup codes for various MD recorder manufacturers.
List of setup codes for various miscellaneous audio component manufacturers.
Procedure to reset the unit's microcomputer to resolve operational errors.
Troubleshooting guide for common issues related to the amplifier section.
Troubleshooting guide for common issues related to the tuner section.
Solutions for problems encountered with the remote control's functionality.
Details which settings are retained and lost during power interruptions.
Technical details for audio output power, input sensitivity, and tone control ranges.
Technical data for video input/output signal characteristics.
Specifications for FM tuner frequency range, sensitivity, and response.
Specifications for AM tuner frequency range and sensitivity.
Technical details on power consumption, physical dimensions, and unit weight.
Describes remote control functions for operating the receiver's tuner.
Describes remote control functions for operating cassette decks.
Describes remote control functions for operating CD players.
Describes remote control functions for operating MD recorders.
Describes remote control functions for operating televisions.
Describes remote control functions for operating VCRs.
Describes remote control functions for operating LD players.
Describes remote control functions for operating satellite tuners.
Describes remote control functions for operating DSS receivers.
Describes remote control functions for operating cable boxes.
Describes remote control functions for operating DVD players.
