Need help?Do you have a question about the Kenwood 107VR and is the answer not in the manual?
General| Power output | 50W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
|---|---|
| Frequency response | 10Hz-100kHz (±1dB) |
| Total harmonic distortion | 0.08% (20Hz-20kHz, 50W) |
| Input sensitivity | 150mV (line), 2.5mV (MM phono) |
| Dimensions | 440 x 148 x 330 mm (W x H x D) |
| Weight | 10.2kg |
Select the correct AC voltage for your unit to ensure proper operation.
Essential safety warnings to prevent electrical hazards and damage.
Guide to unpacking the unit and identifying included accessories.
Explains Dolby Pro Logic and Dolby 3 Stereo for enhanced surround audio.
Details DSP Logic and DSP Presence for immersive audio experiences.
Introduces the SRS 3D Stereo for simulated three-dimensional sound.
Instructions for connecting external audio and video devices.
Understanding XS8 and SL16 modes for component integration.
Features like remote control and automatic operation with connected components.
Procedure to switch between XS8 and SL16 system control modes.
Diagram and steps for connecting surround, center, and main speakers.
Properly connecting the AM loop antenna for optimal reception.
Connecting FM indoor or outdoor antennas for clear reception.
Adjusting switch settings based on geographical area for FM reception.
Detailed explanation of front panel buttons, knobs, and display indicators.
Understanding the function and meaning of the STANDBY indicator.
Description of each button on the remote control unit and its purpose.
Step-by-step guide for installing batteries in the remote control.
Reference table for using remote keys with various KENWOOD components.
Steps to power on the unit and configure speaker output settings.
How to choose an audio source and start playback.
Adjusting the audio volume level for listening.
Adjusting bass, middle, and treble frequencies for desired sound.
Fine-tuning the sound balance between left and right speakers.
How Source Direct provides pure audio by minimizing circuitry.
Utilizing the N.B. circuit to enhance low frequencies at low volumes.
Steps to enable headphone listening and adjust volume.
How to use the mute function to temporarily silence audio output.
Steps for setting up recording and choosing the audio source.
Instructions for copying audio between TAPE 1 and TAPE 2.
Explanation of the TAPE 2 MONITOR feature for source monitoring.
Procedure for tuning into FM and AM radio stations using auto or manual methods.
How to tune radio stations by directly entering their frequency numbers.
Saving tuned radio stations into memory presets.
Accessing stored radio stations by preset number.
Scanning through all stored radio stations sequentially.
Steps to play back video from connected VCRs or video decks.
Guide for recording external video sources onto the unit.
Simulating a movie theater experience with Dolby Pro Logic.
Enhancing center channel imaging with Dolby 3 Stereo.
Creating a movie theater ambiance with DSP Logic.
Adding live atmosphere to music with DSP Presence mode.
Choosing optimal center channel settings for different speaker setups.
Configuring sub-woofer and adjusting front speaker balance.
Adjusting volume levels for center, surround, and sub-woofer.
Calculating and setting optimal delay times for surround speakers.
Choosing between STEREO, PRO LOGIC, DSP, and other surround modes.
Selecting specific sound fields (ARENA, JAZZ CLUB, STADIUM) for DSP modes.
Setting delay times for DSP LOGIC and DSP Presence modes.
Adjusting tone and effect strength (depth/expansion) for SRS 3D.
Steps to reset the unit's microcomputer to factory defaults.
Resolving common issues with sound output, speakers, and indicators.
Resolving problems with radio reception and station presets.
Solutions for common problems encountered with the remote control.
Details on data lost from memory upon power disconnection.
Technical performance details for audio and FM tuner sections.
Technical details for AM tuner, power, dimensions, and weight.
Technical specifications for video input/output connections.
International technical performance details for audio and FM tuner.
International technical details for AM tuner, power, and dimensions.
International technical specifications for video connections.
Important space to log unit's model and serial number for service.
To Next Page
