Need help?Do you have a question about the Kenwood KR-1000 and is the answer not in the manual?
General| Tuning range | FM, MW |
|---|---|
| Damping factor | 50 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Output | 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Power Output | 100 watts per channel into 8Ω (stereo) |
| Frequency Response | 20Hz to 20kHz |
| Signal to noise ratio | 100dB (line) |
| Dimensions | 440 x 158 x 460mm |
To Next Page
