To Next PageTo Next Page
Need help?Do you have a question about the Kenwood 106VR and is the answer not in the manual?
Explains AC voltage selector switch setting for safe operation.
Warnings to prevent fire, electric shock, and other hazards.
Explains how to connect audio and video components to the receiver.
Illustrates and explains how to connect various speakers to the unit.
Identifies and explains the function of front panel controls and indicators.
Details the functions of each key on the remote control unit.
Step-by-step guide to playing music from selected sources.
Covers preparation and recording music sources.
Steps to tune in broadcast stations using auto or manual tuning.
How to adjust the volume levels of individual speakers.
How to set the delay time for surround speakers.
Procedure to reset the microcomputer and restore normal operation.
General| Power output | 45 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency response | 10 Hz-50 kHz (±1 dB) |
| Total harmonic distortion | 0.08% (1 kHz, 50 W) |
| Input sensitivity (MM) | 2.5mV |
| Input sensitivity (line) | 150mV |
| Signal to noise ratio (MM) | 75dB |
| Output (line) | 150mV |
| Speaker load impedance | 8Ω to 16Ω |
| Dimensions | 440 x 123 x 300mm |
| Weight | 6.7kg |
