Do you have a question about the Kenwood CKDC-392V/VA and is the answer not in the manual?
Illustrates the functional blocks of the CD player and electric units.
Shows foil and component side views of various unit PC boards.
Illustrates the assembly breakdowns of the unit and CD mechanism.
Lists components and their functions for switch, CD player, and electric units.
Details terminals for system microcomputer and CD mechanism control IC.
Comprehensive listing of all unit, switch, CD player, and electric unit parts.
Provides circuit diagrams for electric, switch, and CD player units.
Lists FM, AM, CD, amplifier, and general operating specifications.
Explains test mode entry, exit, specifications, and adjustments.
Illustrates the functional blocks of the CD player and electric units.
Shows foil and component side views of various unit PC boards.
Illustrates the assembly breakdowns of the unit and CD mechanism.
Lists components and their functions for switch, CD player, and electric units.
Details terminals for system microcomputer and CD mechanism control IC.
Comprehensive listing of all unit, switch, CD player, and electric unit parts.
Provides circuit diagrams for electric, switch, and CD player units.
Lists FM, AM, CD, amplifier, and general operating specifications.
Explains test mode entry, exit, specifications, and adjustments.
| Preout Level/Load-Unbalanced | 2000mV/10kΩ |
|---|---|
| Frequency Range (Frequency step) Preout Impedance | ≤600Ω |
| Usable Sensitivity (S/N 30dB) | 9.3dBf (0.8µV/75Ω) |
| Quieting Sensitivity (S/N 50dB) | 15.2dBf (1.6µV/75Ω) |
| Frequency Response (±3.0dB) | 30Hz~15kHz |
| S/N | 70dB (MONO) |
| Selectivity | ≥80dB (±400kHz) |
| Stereo Separation | 40dB (1kHz) |
| Maximum Power | 50W x 4 |
| Full Bandwidth Power (at less than 1% THD) | 22W x 4 |
| Bass | 100Hz±10dB |
| Middle | 1kHz±10dB |
| Treble | 10kHz±10dB |
| Frequency Range (Frequency step) | 530kHz~1700kHz (10kHz) |
| Channel Space Selection | 9k/10kHz |
| Usable Sensitivity (S/N 20dB) | 28dBµ (25µV) |
| Total Harmonic Distortion | 0.01% (1kHz) |
| S/N Ratio | 93dB (1kHz) |
| Dynamic Range | 93dB |
| Channel Separation | 85dB |
| Operating Voltage | 14.4V |
|---|---|
| Current Consumption | 10A |
| Installation Size (W x H x D) | 182 x 53 x 155 mm |
| Weight | 1.40kg (3.1lbs) |
Loading...