J
Joseph WongSep 9, 2025
Why does playback not start on my Kenwood DDX42BT?
- MMary FloresSep 9, 2025
Playback does not start because the format of files is not supported by the unit.
To Next PageTo Next PageWhy does playback not start on my Kenwood DDX42BT?
Playback does not start because the format of files is not supported by the unit.
What to do if Kenwood DDX42BT USB Device Error?
If your Kenwood Car Receiver displays a “USB Device Error”, it means the USB power voltage is abnormal. Try turning the unit off and then on again. If the issue persists, connect another USB device.
Why is there no sound from my Kenwood Car Receiver speakers?
If no sound is coming from the speakers of your Kenwood Car Receiver, first, adjust the volume to an optimum level. If that doesn't work, check the cords and connections to ensure they are properly connected.
What does 'Authorization Error' mean on my Kenwood Car Receiver?
The “Authorization Error” on your Kenwood Car Receiver indicates that the connected iPod/iPhone may not be compatible with the unit. Check the compatibility of your device.
Why is my Kenwood DDX42BT showing 'No Signal'?
If your Kenwood Car Receiver displays a “No Signal” message: • Start playback on the external component connected to AV-IN1 or iPod/AV-IN2 input terminal. • Check the cords and connections. • The signal input may be too weak.
Why is there no picture on the external monitor connected to my Kenwood Car Receiver?
If no picture appears on the external monitor connected to your Kenwood Car Receiver: • Connect the video cord correctly. • Select the correct input on the external monitor.
Why can't disc be played back on Kenwood Car Receiver?
To resolve disc playback issues on your Kenwood Car Receiver: • Record the tracks using a compliant application on the appropriate discs. • Add appropriate extension codes to the file names.
Why won't my Kenwood DDX42BT copy the phonebook?
The unit does not respond when you try to copy the phonebook to the unit because you may have tried to copy the same entries (as stored) to the unit.
Why won't my iPod/iPhone turn on with Kenwood DDX42BT Car Receiver?
If your iPod/iPhone does not turn on or work with the Kenwood Car Receiver: • Check the connecting cable and its connection. • Update the firmware version. • Charge the battery. • Check whether the iPod/iPhone control mode is correctly selected. • Reset the iPod/iPhone.
Why is there no sound from my Kenwood DDX42BT Car Receiver using iPod/iPhone?
If no sound is coming from the speakers of your Kenwood Car Receiver while using an iPod/iPhone: • Disconnect the iPod/iPhone, then connect it again. • Select another source and then reselect “iPod.”
Procedure for resetting the unit to factory settings.
Steps for initial configuration of the unit upon first use or reset.
Procedure for powering the unit on and off.
How to control audio volume and mute sound temporarily.
Guide on choosing different media sources like DISC, TUNER, iPod, USB, etc.
How to play back content from a CD or DVD.
Specific playback controls and features for various media formats.
How to play files from a USB mass storage device.
Procedure for connecting a USB storage device.
Adjusting audio equalizers and saving custom sound profiles.
Steps to enable the rear view camera feature.
Steps to connect and pair Bluetooth devices using SSP or PIN code.
Troubleshooting common unit errors like "No Signal" or "Parking Off".
Troubleshooting specific Bluetooth errors like "Connection Error" or "No Voice Device".
Troubleshooting sound, picture, and radio reception issues.
Resolving issues with disc and file format compatibility or playback.
Troubleshooting problems with external video input connections.
Step-by-step instructions for physically installing the unit in the vehicle.
Guide for securely mounting the main unit into the vehicle.
Instructions for removing the unit from specific DDX models.
General| Display Size | 6.2 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Bluetooth | Yes |
| USB Ports | 1 |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| DVD Player | Yes |
| RMS Power Output | 22 watts x 4 |
| Peak Output | 50 watts x 4 |
| Number of Channels | 4 |
| Touchscreen | Yes |
| iPod Compatibility | Yes |
| Pandora control | Yes |
| AUX Input | Yes |
| CD Playback | Yes |
| Radio Tuner | AM/FM |
| Rear Camera Input | Yes |
| Steering Wheel Control | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Video Formats Supported | MPEG-1, MPEG-2, DivX |
| SiriusXM | Ready |
| Power Output | 50 Watts x 4 Channels |
| Preamp Voltage | 2.5V |
