Kenwood DNX570HD User Manual

106106 107
Return to the Top page
Audio Setting Up
Return to the Top page
Audio Setting Up
Operation
Controlling EQ curves
1 Select EQ curve from [Natural], [Rock],
[Pops], [Easy], [Top40], [Jazz], and
[User] using [2] and [3].
Controlling SystemQ-Ex
Selectsitemstobeadjustedfortonecurve
setup.Ifyouturnoffthissetting,onlyLevel
canbesetupfortonecurves.
1 Touch [ON] or [OFF] of [SystemQ-Ex].
Controlling equalizer manually
1 Touch [Tone] in the Equalizer screen.
2 Set each item as follows.
FREQ
Adjusts the center frequency for each range.
Setting values are as follows.
Bass: 60Hz/70Hz/80Hz/100Hz/110Hz/120Hz/
130Hz/150Hz (Default is “100Hz”.)
Middle: 500Hz/1kHz/1.5kHz/2kHz (Default is
“1kHz”.)
Treble: 10kHz/12.5kHz/15kHz/17.5kHz (Default
is “12.5kHz”.)
LEVEL
Adjusts the level of each range.
Each setting value is within -8dB and 8dB and
default is “0dB”.
Q Factor
Adjust Q value for bass and middle.
Setting values are as follows.
Bass: 1.00/1.25/1.50/2.00 (Default is “1.00”.)
Middle: 1.00/2.00 (Default is “1.00”.)
Bass DC EXT
Turns Bass DC EXT on or off. Default is “OFF”.
If you select “ON”, the bass center frequency is
extended to the low register by approximately
20%.
[Flat]
Tone level becomes 0 (flat).
Subwoofer Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to “OFF”.
See Speaker setup (P.101).
Zone Control
Youcanselectdifferentsourcesforboth
frontandrearpositionsinthevehicle.
1 Touch [Zone Control].


Zone Control screen appears.
2 Touch [Dual Zone].
3 Set each source as follows.
[3] (Front Source, Rear Source)
Select the audio source for each.
[∞], [5] (Rear VOL.)
Adjusts the rear channel volume.
[Single Zone]
Touch to turn off the dual zone function.
NOTE
• When the rear speaker sound is switched, the
audio source that is output at the AV OUTPUT
terminal is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
• Output from the subwoofer
• Subwoofer Level/Bass Boost
(P.104)
• Equalizer Control/Space Enhancer
/Listening Position
(P.105, 108, 110)
• DSP Bypass Control
/Speaker
Setup/Car Type Setup
(P.103, 101, 102)

Kenwood DNX570HD Specifications

General

Resolution	800 x 480 pixels
GPS Navigation	Yes
Bluetooth	Yes
USB Ports	1
HD Radio	Yes
Apple CarPlay	No
Android Auto	No
DVD Player	Yes
SD Card Slot	Yes
CD Player	Yes
iPod/iPhone Control	Yes
Steering Wheel Control	Yes
Backup Camera Input	Yes
Audio Formats Supported	MP3, WMA, AAC
Video Formats Supported	MPEG-1, MPEG-2, MPEG-4, WMV
SiriusXM	Yes (with optional tuner)