Kenwood DNX6020EX User Manual

AV Input Setup
I You can set AV input parameters.
I
I D Display the AV-IN Setup screen
I .
I
i Touch [Ga] > [,....,] > [AV-IN SETUP] (page 62)
D Set each item
i
[On Screen AV-IN] Sets an on-screen display
of the AV-IN playback screen. (1;! "Auto")
"Auto": Information
is displayed for 5 seconds
when updated.
"Manual": Information
is displayed when you
touch on the screen.
[iPod AV Interface Use] Sets the terminal to
which the iPod is connected to. (1;1 "iPod")
[AV-INl Name], [AV-IN2 Name] Sets a name
to be displayed when you select a system that
is connected via the AV INPUT port.
(:;: "VIDEO")
Q
~
• [iPod AV Interface Use]
This item can be set when in STANDBY source and also
the iPod is unconnected .
• [AV-IN Name]
One AV-IN name is displayed when "iPod" is selected in
[iPod AV Interface Use] and two are displayed when not
selected.
•
DDX SERIES DDX616/DDX6046BT/DDX516
AV Interface Setup
You can set audio and visual (AV) interface
parameters.
D Display the AV Interface screen
Touch [Ga] > [~] > [AV Interface]. (page 62)
fJ Set each item
[AV-OUT] Selects an AV source to be output at
the
AV OUTPUT port. (i~j "AV-INl ")
[R-CAM Interrupt] Sets a method to switch to
the rear view camera video display.
(I~ "OFF")
"ON": Switches to the rear camera video
display when "Reverse" gear
is engaged.
"OFF": The monitor does not switch to the
rear view camera video display even
when engaging the shift knob of car to
"Reverse".
e
• When in DVD source, "AV-OUT" cannot be set to USB
~ When in USB source, "AV-OUT" cannot be set to DVD.
English
73

Kenwood DNX6020EX Specifications

General

Brand	Kenwood
Model	DNX6020EX
Category	Car Navigation system
Language	English