EasyManua.ls Logo

Kenwood DNX690HD - User Manual

Kenwood DNX690HD
141 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
B59-2176-00/00 (K/K2/R)© 2012 JVC KENWOOD Corporation
DNX890HD
DNX7700BT
DNX690HD
DNX570HD
DNX5080EX
DNX5700BT
GPS NAVIGATION SYSTEM
Quick Start Guide
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new
GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space
provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or
service on the product.
Model DNX890HD/ DNX7700BT/ DNX690HD/ DNX570HD/ DNX5080EX/ DNX5700BT Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com

Table of Contents

Other manuals for Kenwood DNX690HD

Questions and Answers

  • M
    Mr. Kevin ClarkSep 23, 2025
    What to do if the recording condition is bad on Kenwood GPS?
    • Y
      Yvonne DavisSep 23, 2025
      If the recording condition is bad on your Kenwood GPS, record the file again or use another disc.
  • M
    melissa87Aug 25, 2025
    What to do if Kenwood GPS says to update Aha application?
    • C
      Carmen CareyAug 25, 2025
      If your Kenwood GPS displays 'Please update your Aha application', confirm that the Aha application is the latest version.
  • P
    Paul ParkAug 25, 2025
    What to do if Kenwood GPS shows a hot error?
    • C
      Christopher ChavezAug 26, 2025
      If the Kenwood GPS displays the 'Hot Error' message, it means the internal temperature has risen above 60°C, activating the protection circuit. To resolve this, allow the unit to cool down before attempting to use it again.
  • A
    Alyssa Kim MDAug 27, 2025
    What to do if Kenwood GPS shows error message protect?
    • M
      Mike MossAug 27, 2025
      If your Kenwood GPS displays 'Error Message Protect', it indicates that the protective circuit has been activated, usually due to a shorted speaker cord or contact with the car chassis. Ensure the speaker cord is properly wired and insulated, then press the Reset button.
  • N
    nevansSep 23, 2025
    What does check application mean on Kenwood DNX690HD GPS?
    • J
      Joan SawyerSep 23, 2025
      If your Kenwood GPS displays 'Check Application', start the Aha application of your device.
  • C
    Cynthia SantosSep 13, 2025
    Why can't I set up the high pass filter on Kenwood DNX690HD?
    • H
      Holly ChambersSep 13, 2025
      If you cannot set up the high pass filter on your Kenwood GPS, turn off the dual zone function.
  • M
    Michael MooreSep 12, 2025
    Why is there no output from the subwoofer on Kenwood DNX690HD?
    • M
      Marissa PetersonSep 12, 2025
      If there's no output from the subwoofer on your Kenwood GPS, turn off the dual zone function.
  • F
    Fred PearsonSep 12, 2025
    Why can't I set up the low pass filter on Kenwood DNX690HD?
    • N
      Noah LongSep 12, 2025
      If you cannot set up the low pass filter on your Kenwood GPS, turn off the dual zone function.
  • C
    Cassandra JenningsSep 4, 2025
    What does region code error mean on Kenwood DNX690HD?
    • P
      parkschristineSep 4, 2025
      If your Kenwood GPS displays 'Region Code Error', the disc's region code is incompatible with the unit. Try another disc.
  • L
    Laura SmithSep 2, 2025
    What does read error mean on Kenwood DNX690HD?
    • M
      mlopezSep 2, 2025
      If your Kenwood GPS displays 'Read Error', it means the disc is dirty. Clean the disc.

Summary

Precautions

2 WARNING

To prevent injury or fire, take the following precautions.

Acquiring GPS signal

How to Reset Your Unit

Safety Precautions and Important Information

2 WARNINGS

Potentially hazardous situations that could result in death or serious injury.

2 CAUTIONS

Potentially hazardous situations that may result in injury or property damage.

First Step

Basic Operations

Functions of the Buttons on the Front Panel

Overview and function of the unit's front panel buttons.

Functions of the Buttons on the Front Panel

Common Operations

General

Functions that can be operated from most screens.

How to Use the Navigation System

2 Operate the desired function from the Main Menu screen.

Operating functions from the main navigation menu.

3 Enter your destination and start the guidance.

Entering a destination and initiating route guidance.

Follow your route to the destination.

Other Features

Updating the software

Instructions for updating the navigation system software.

Updating maps

Instructions for purchasing and updating map data.

How to Play Music

1 Connect the media you want to play as shown below.

Connecting discs, iPod, and USB devices for playback.

2 Control the music you are listening to on the source control screen.

3 Search the track;file you want to listen to.

How to Play Movie;Picture

1 Connect the media you want to play.

Connecting media for movie and picture playback.

2 Control the movie;picture by touching the screen.

Controlling movie and picture playback via screen controls.

How to Listen to the Radio; HD Radio Tuner; SiriusXM

3 Operate on the source control screen.

Performing operations on the radio, HD Radio, or SiriusXM source screen.

How to Make a Phone Call

1 Register your cell-phone to the unit.

Procedure for pairing a cell-phone with the unit.

2 Connect your cell-phone to the unit.

Connecting a paired cell-phone for use.

Make or receive a phone call.

Installation Procedure

Before Installation

Important precautions to note before starting installation.

WARNINGS

Critical warnings related to electrical and short circuit hazards.

CAUTION

Precautions regarding hot surfaces and unit installation.

Unit

GPS antenna

Removing Procedure

Connection

System connection

Overview of system connections and wiring.

Connecting wires to terminals

FCC WARNING

CAUTION

IC (Industry Canada) Notice

Getting Started

Satellite Signals

Finding Locations

Finding a Location by Category

Finding locations by browsing through categories.

Searching Within a Category

Narrowing search results within a specific category.

Finding a Location Using the Search Bar

Searching for locations using a text search bar.

Finding an Address

Finding a City

Finding an Intersection

Finding a Location Using Coordinates

Finding a Location by Browsing the Map

Find a Location Using Quick Search

Saving a Home Location

Going Home

Saving a Location

Saving Your Current Location

Starting a Route to a Saved Location

Navigation

Starting a Route

Steps to start navigating to a destination.

Following a Route

Guidance on following the active navigation route.

Using the Navigation Map

Using the map interface for navigation and control.

Using Exit Services

Avoiding Road Features

The Map Pages

Viewing a List of Turns

Viewing the Entire Route on the Map

Viewing the Next Turn

Viewing Junctions

Viewing Traffic Alerts

Viewing Trip Information

Viewing Current Location Information

Directions to Your Current Location

Using the Apps

Downloading Smartphone Link

Instructions for downloading the Smartphone Link app.

Connecting to Smartphone Link

Steps to connect the navigation system to Smartphone Link.

About Garmin Live Services

Subscribing to Garmin Live Services

Steps to subscribe to Garmin Live Services via the app.

About ecoRoute

Creating a Vehicle Profile

Creating a vehicle profile for ecoRoute calculations.

Calibrating Fuel Economy

Calibrating fuel economy for accurate reporting.

Taking the ecoChallenge

Viewing Your Fuel Economy

Viewing a Mileage Report

Viewing recent mileage reports.

Viewing the Weather Forecast

Planning a Trip

Navigating to a Saved Trip

Starting navigation to a saved trip.

Traffic Information

Traffic Data Using Smartphone Link

Traffic on Your Route

Viewing Traffic on the Map

Searching for Traffic Delays

Viewing a Traffic Incident on the Map

About Traffic Cameras

Customizing the Settings

Appendix

Updating the Software

Instructions for updating the navigation system software.

Updating the Map Data

Instructions for purchasing and updating map data.

Kenwood DNX690HD Specifications

General IconGeneral
Resolution800 x 480 pixels
GPS NavigationYes
BluetoothYes
USB Ports1
HD RadioYes
SiriusXM ReadyYes
Apple CarPlayNo
Android AutoNo
DVD PlaybackYes
AUX InputYes
iPod/iPhone ControlYes
Steering Wheel ControlYes
Voice ControlYes
Map DatabaseGarmin
Audio Formats SupportedMP3, WMA, AAC, FLAC

Related product manuals