M
michaela76Sep 16, 2025
Why can't I repeat play during VCD playback on Kenwood GPS?
- KKathryn ThomasSep 16, 2025
If you cannot perform repeat play during VCD playback on your Kenwood GPS, turn off the PBC function.
To Next PageTo Next PageWhy can't I repeat play during VCD playback on Kenwood GPS?
If you cannot perform repeat play during VCD playback on your Kenwood GPS, turn off the PBC function.
What to do if Kenwood GPS says to update Aha application?
If your Kenwood GPS displays 'Please update your Aha application', confirm that the Aha application is the latest version.
What to do if Kenwood GPS shows a hot error?
If the Kenwood GPS displays the 'Hot Error' message, it means the internal temperature has risen above 60°C, activating the protection circuit. To resolve this, allow the unit to cool down before attempting to use it again.
What to do if Kenwood GPS shows error message protect?
If your Kenwood GPS displays 'Error Message Protect', it indicates that the protective circuit has been activated, usually due to a shorted speaker cord or contact with the car chassis. Ensure the speaker cord is properly wired and insulated, then press the Reset button.
What to do if Kenwood DNX690HD GPS shows mecha error?
If your Kenwood GPS displays 'Mecha Error', it means the disc player is malfunctioning. Eject the disc and try inserting it again. If the error persists or the disc cannot be ejected, contact your Kenwood dealer.
Why can't I set up the high pass filter on Kenwood DNX690HD?
If you cannot set up the high pass filter on your Kenwood GPS, turn off the dual zone function.
Why is there no output from the subwoofer on Kenwood DNX690HD?
If there's no output from the subwoofer on your Kenwood GPS, turn off the dual zone function.
Why can't I set up the low pass filter on Kenwood DNX690HD?
If you cannot set up the low pass filter on your Kenwood GPS, turn off the dual zone function.
What does region code error mean on Kenwood DNX690HD?
If your Kenwood GPS displays 'Region Code Error', the disc's region code is incompatible with the unit. Try another disc.
What does read error mean on Kenwood DNX690HD?
If your Kenwood GPS displays 'Read Error', it means the disc is dirty. Clean the disc.
General| Resolution | 800 x 480 pixels |
|---|---|
| GPS Navigation | Yes |
| Bluetooth | Yes |
| USB Ports | 1 |
| HD Radio | Yes |
| SiriusXM Ready | Yes |
| Apple CarPlay | No |
| Android Auto | No |
| DVD Playback | Yes |
| AUX Input | Yes |
| iPod/iPhone Control | Yes |
| Steering Wheel Control | Yes |
| Voice Control | Yes |
| Map Database | Garmin |
| Audio Formats Supported | MP3, WMA, AAC, FLAC |
To prevent injury or fire, take the following precautions.
Potentially hazardous situations that could result in death or serious injury.
Potentially hazardous situations that may result in injury or property damage.
Overview and function of the unit's front panel buttons.
Functions that can be operated from most screens.
Operating functions from the main navigation menu.
Entering a destination and initiating route guidance.
Instructions for updating the navigation system software.
Instructions for purchasing and updating map data.
Connecting discs, iPod, and USB devices for playback.
Connecting media for movie and picture playback.
Controlling movie and picture playback via screen controls.
Performing operations on the radio, HD Radio, or SiriusXM source screen.
Procedure for pairing a cell-phone with the unit.
Connecting a paired cell-phone for use.
Important precautions to note before starting installation.
Critical warnings related to electrical and short circuit hazards.
Precautions regarding hot surfaces and unit installation.
Overview of system connections and wiring.
Finding locations by browsing through categories.
Narrowing search results within a specific category.
Searching for locations using a text search bar.
Steps to start navigating to a destination.
Guidance on following the active navigation route.
Using the map interface for navigation and control.
Instructions for downloading the Smartphone Link app.
Steps to connect the navigation system to Smartphone Link.
Steps to subscribe to Garmin Live Services via the app.
Creating a vehicle profile for ecoRoute calculations.
Calibrating fuel economy for accurate reporting.
Viewing recent mileage reports.
Starting navigation to a saved trip.
Instructions for updating the navigation system software.
Instructions for purchasing and updating map data.
