To Next PageTo Next PageWhy is sound interrupted during Bluetooth playback on my Kenwood Car Receiver?
If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your Kenwood Car Receiver: - Reduce the distance between the unit and the Bluetooth audio player. - Turn off, then turn on the unit and try to connect again. - Be aware that other Bluetooth devices might be trying to connect to the unit.
What to do if my Kenwood Car Receiver says 'MISWIRING CHECK WIRING THEN PWR ON'?
If your Kenwood Car Receiver displays 'MISWIRING CHECK WIRING THEN PWR ON', turn the power off. Check to be sure the terminals of the speaker wires are insulated properly, and then turn the power back on.
Why is my Kenwood Car Receiver not working at all?
If your Kenwood Car Receiver is not working, try resetting the unit.
Why is voice calling not successful on my Kenwood Car Receiver?
If voice calling is not successful on your Kenwood Car Receiver, use voice calling in a more quiet environment, reduce the distance from the microphone when you speak the name, and make sure the same voice as the registered voice tag is used.
Why can't I control the Bluetooth audio player on my Kenwood Car Receiver?
If the connected Bluetooth audio player cannot be controlled via your Kenwood Car Receiver, check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). Also, try disconnecting and connecting the Bluetooth player again.
Why does my Kenwood Car Receiver say 'DISCONNECTED'?
If your Kenwood Car Receiver displays 'DISCONNECTED', it means the USB is disconnected from the head unit. Please make sure the device is connected properly through USB.
Why does my Kenwood Car Receiver say 'NO DISC'?
If your Kenwood Car Receiver displays 'NO DISC', insert a playable disc into the loading slot.
Why does my Kenwood Car Receiver say 'NO DEVICE'?
If your Kenwood Car Receiver displays 'NO DEVICE', connect a USB device and change the source to USB again.
Why does my Kenwood Car Receiver display 'CONNECTING'?
If your Kenwood Car Receiver displays 'CONNECTING': - If connected via USB input terminal: The device is connecting to the head unit. Please wait. - If connected via Bluetooth: The Bluetooth is disconnected. Please check Bluetooth connection and make sure both the device and the unit are paired and connected.
Why do tracks not play back as intended on my Kenwood Car Receiver?
If tracks on your Kenwood Car Receiver do not play back as you intended, it is because playback order is determined when files are recorded.
Read and observe warnings and cautions for proper product use.
Advisories regarding safe driving and battery hazards.
Precautions for volume settings and general usage.
Initial setup for language selection and disabling the demo mode.
Steps to establish a Bluetooth connection.
Managing phone calls and operations via Bluetooth.
Connecting and playing audio from Bluetooth devices.
Procedure for initial pairing with Bluetooth devices.
Adjusting sound settings like subwoofer, EQ, and bass.
Specific settings for 2-way crossover configurations.
Adjusting speaker delays for optimal sound staging.
Assigning functions to steering wheel remote control buttons.
Troubleshooting common issues not specific to a function.
Troubleshooting issues related to radio reception.
Troubleshooting issues with CD, USB, and iPod playback.
Critical safety warnings for unit installation.
Diagram and explanation of all electrical connections.
Safety precautions and recommendations for installation.
General
