To Next PageTo Next PageWhy is sound interrupted during Bluetooth playback on my Kenwood Car Receiver?
If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your Kenwood Car Receiver: - Reduce the distance between the unit and the Bluetooth audio player. - Turn off, then turn on the unit and try to connect again. - Be aware that other Bluetooth devices might be trying to connect to the unit.
What to do if my Kenwood Car Receiver says 'MISWIRING CHECK WIRING THEN PWR ON'?
If your Kenwood Car Receiver displays 'MISWIRING CHECK WIRING THEN PWR ON', turn the power off. Check to be sure the terminals of the speaker wires are insulated properly, and then turn the power back on.
Why is my Kenwood Car Receiver not working at all?
If your Kenwood Car Receiver is not working, try resetting the unit.
Why is voice calling not successful on my Kenwood Car Receiver?
If voice calling is not successful on your Kenwood Car Receiver, use voice calling in a more quiet environment, reduce the distance from the microphone when you speak the name, and make sure the same voice as the registered voice tag is used.
Why can't I control the Bluetooth audio player on my Kenwood Car Receiver?
If the connected Bluetooth audio player cannot be controlled via your Kenwood Car Receiver, check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). Also, try disconnecting and connecting the Bluetooth player again.
Why does my Kenwood Car Receiver say 'DISCONNECTED'?
If your Kenwood Car Receiver displays 'DISCONNECTED', it means the USB is disconnected from the head unit. Please make sure the device is connected properly through USB.
Why does my Kenwood Car Receiver say 'NO DISC'?
If your Kenwood Car Receiver displays 'NO DISC', insert a playable disc into the loading slot.
Why does my Kenwood Car Receiver say 'NO DEVICE'?
If your Kenwood Car Receiver displays 'NO DEVICE', connect a USB device and change the source to USB again.
Why does my Kenwood Car Receiver display 'CONNECTING'?
If your Kenwood Car Receiver displays 'CONNECTING': - If connected via USB input terminal: The device is connecting to the head unit. Please wait. - If connected via Bluetooth: The Bluetooth is disconnected. Please check Bluetooth connection and make sure both the device and the unit are paired and connected.
Why do tracks not play back as intended on my Kenwood Car Receiver?
If tracks on your Kenwood Car Receiver do not play back as you intended, it is because playback order is determined when files are recorded.
Essential safety and operational guidelines for product use, including warnings and cautions.
Basic guide on understanding manual conventions and symbols.
Identifies and describes the main controls and display elements of the unit.
Instructions on how to restore the device to factory settings.
Guides through first-time language selection and demonstration mode cancellation.
Steps to configure the unit's time and date settings.
Initial setup for basic functions like audio, display, and system.
Detailed steps for setting time formats and date formats.
Configuration of audio control, display, tuner settings, and system options.
Settings for distinguishing CD types and updating the unit's firmware.
Options for resetting settings and controlling clock display when the unit is off.
How to configure speaker crossover for optimal audio output based on connection.
Methods for finding radio stations and accessing them directly.
Configuration for local seek, auto memory, mono set, and reception enhancements.
Finding stations by program type and synchronizing the unit's time.
Connecting external audio devices and starting playback through the AUX input.
Assigning a custom name to the AUX input source for easier identification.
How to begin playback and switch between different media sources.
Controls and features for playing music from iPod and iPhone devices.
Controls and features for playing music from Android devices.
Managing playback repetition, randomization, and device control modes.
Browsing files and folders, and using search functions for media playback.
Instructions for listening to internet radio services via TuneIn.
Searching files by name and using the KENWOOD Remote application.
Quickly finding specific tracks or files using direct search methods.
Setting up and starting Spotify playback via Bluetooth or USB.
Using playback, track skip, and thumbs up/down features for Spotify.
Marking songs to save them to your Spotify music library.
Browsing songs and stations within the Spotify application.
Supported profiles, codecs, and general connection principles.
Instructions for connecting and properly positioning the external microphone.
Step-by-step guide for pairing a new Bluetooth device with the unit.
How auto-pairing works, particularly when connecting via USB.
Handling incoming calls, managing active calls, and adjusting call volume.
Switching call audio between car speakers and the phone's handset.
Adjusting microphone gain, noise reduction, and echo cancellation for calls.
Configuring call reception and initiating calls via various methods.
Reviewing incoming, outgoing, and missed calls from the unit.
Accessing contacts and dialing numbers directly from the unit.
Using voice commands for making calls and controlling phone functions.
Saving frequently used contacts or numbers to preset memory buttons.
Initiating calls using the stored contacts in memory.
Managing device connections, deletion, PIN codes, and auto-reconnect.
Checking the compatibility and connectivity of Bluetooth devices.
Managing audio playback via Bluetooth, including repeat, random, and track selection.
Configuring the KENWOOD Remote app for control via Bluetooth or USB.
Checking connection status and listening to iPhone/iPod via Bluetooth.
Listening to Spotify internet radio streams over Bluetooth connection.
Adjusting sound parameters while listening to any source.
Fine-tuning bass, equalizer, and sound effect settings.
Adjusting various sound enhancement features like bass boost and sound effects.
Configuring digital time alignment and car-specific audio parameters.
Introduction to speaker crossover adjustments for audio systems.
Selecting speaker sizes and configuring crossover frequencies.
Detailed settings for configuring 2-way speaker systems.
Detailed settings for configuring 3-way speaker systems.
Adjusting speaker delays for optimal sound staging and listening environment.
Configuring DTA position, distance, gain, and car type for time alignment.
How to measure and calculate values for accurate digital time alignment.
Understanding the different display zones for color and brightness customization.
Adjusting screen brightness and setting automatic dimmer timers.
Customizing colors, brightness levels for zones, and text scrolling behavior.
How to physically connect the steering wheel remote control to the unit.
Assigning functions to the steering wheel control buttons.
How to reset and reconfigure the assigned steering wheel control keys.
Instructions for cleaning the unit and properly handling discs.
Details on compatible media, USB devices, and iPod/iPhone models.
Information regarding compatibility with Android devices and Spotify.
Notes on Bluetooth device connection and potential issues.
How to cycle through different types of information displayed on the screen.
Common problems related to sound, wiring, unit operation, reception, and static.
Troubleshooting disc ejection, playback errors, and device detection.
Problems with character display, file errors, and device recognition.
Troubleshooting Android device connection, playback, and control.
Resolving problems with Spotify app connectivity and Bluetooth pairing/connection.
Troubleshooting dropped connections, voice tag issues, and call quality.
Essential safety precautions and warnings related to unit installation.
Step-by-step guide for the initial installation of the unit.
Details on installation parts and mounting techniques for different car types.
Visual guide for connecting power, speakers, antenna, and control wires.
Information on connecting external components like microphones and remote controls.
Technical details for FM, AM, and SW radio reception.
Technical data for CD player, USB, Bluetooth, and auxiliary interfaces.
Details on maximum output power, speaker impedance, and tone controls.
Electrical, temperature, installation size, and weight specifications.
Details on trademarks, compatibility, and software licenses.
General| Subwoofer Preamp Output | Yes |
|---|---|
| Bluetooth | Yes |
| Display Type | LCD |
| CD Player | Yes |
| AM/FM Tuner | Yes |
| iPod Compatibility | Yes |
| HD Radio | No |
| Steering Wheel Control Compatible | Yes |
| Remote Control | Yes |
| DIN Size | Double DIN |
| Maximum Power Output | 50 Watts x 4 Channels |
| RMS Power Output | 22 Watts x 4 Channels |
| RMS Power Bandwidth | 20Hz - 20kHz |
| Preamp Voltage | 2.5V |
| Preamp Outputs | 3-channel |
| USB Input | Yes |
| AUX Input | Yes |
| Compatible Formats | MP3, WMA, AAC, FLAC |
| Equalizer | 13-band |
| Faceplate | Detachable |
