A
Alexa MckinneySep 12, 2025
What does “NO ENTRY” mean on my Kenwood Car Receiver?
- NNicholas AllenSep 12, 2025
If your Kenwood Car Receiver displays “NO ENTRY”, there is no registered device connected/found via Bluetooth.
To Next PageTo Next PageWhat does “NO ENTRY” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO ENTRY”, there is no registered device connected/found via Bluetooth.
How to fix Bluetooth pairing issues on Kenwood Car Receiver?
If you're having trouble pairing a Bluetooth device with your Kenwood Car Receiver, ensure you've entered the same PIN code on both devices. If the problem persists, delete the pairing information from both the unit and the Bluetooth device, and then try pairing again.
What does “MEMORY FULL” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “MEMORY FULL”, it means you have reached the maximum storage limit of your iPod/iPhone.
Why is Alexa giving the wrong response on my Kenwood Car Receiver?
If Alexa is giving the wrong response on your Kenwood Car Receiver, it means Alexa misunderstood what was said or did not catch the entire request or sentence spoken.
What does “CH LOCKED LOCK CODE?” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “CH LOCKED LOCK CODE?”, the selected channel is locked. Enter the correct pass code to unlock it.
What does “SCAN CANCEL” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “SCAN CANCEL”, it means TuneScan has been aborted.
What does “iPod ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod or resetting it. You can also press and hold the SRC button to turn off the power, then turn it back on for error recovery.
What does “NA FILE” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NA FILE”, make sure the media (USB) contains supported audio files.
How to exit the “TALKING” screen on my Kenwood Car Receiver after a call?
If you are unable to exit from the “TALKING” screen after ending a call on your Kenwood Car Receiver, press number button 6 to return to the previous source control screen.
What does “USB HUB IS NOT SUPPORTED” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver shows “USB HUB IS NOT SUPPORTED”, it means the unit cannot support a USB device connected via a USB hub.
Covers crucial warnings and cautions for safe operation, volume, and handling.
Guide for setting initial language preference and disabling the demonstration mode.
Details playback controls, file selection, folder navigation, and repeat/random modes.
Covers preparation, listening, and parental control features for SiriusXM service.
Step-by-step guide for pairing a new Bluetooth device with the car receiver.
Explains how incoming calls are indicated and handled, including auto answer.
Instructions for making calls via call history, phonebook, or voice commands.
Details how to activate and use voice commands for initiating calls.
Steps to select BT AUDIO source and operate the audio player for playback.
Guides on preparing and setting up the Alexa service on your device and the unit.
Details manual pairing steps via the Alexa app's 'Devices' tab and receiver name.
Explains how to activate Alexa via voice or button press and lists conditions for activation.
Describes interacting with Alexa, its states (thinking, speaking, idle), and returning to previous source.
Guides on activating Alexa via voice command or button press for music playback.
Covers source-specific sound adjustments, EQ presets, and subwoofer level settings.
Provides an introduction to installation, safety precautions, and general guidelines for installers.
Details the basic procedure, part list, and in-dash mounting for unit installation.
Provides a diagram and instructions for connecting all necessary wires for the unit.
Covers common problems like no sound, wiring errors, unit not working, and display character issues.
Troubleshoots SiriusXM channel lock/unsubscribed and Bluetooth call quality/sound interruption.
Troubleshoots device errors, Bluetooth connection instability, and Alexa app connectivity issues.
General