What to do if Kenwood Receiver does not detect Bluetooth device?
If your Kenwood Receiver is not detecting any Bluetooth devices, try searching from the Bluetooth device again. If that doesn't work, reset the unit.
What to do if “UNRESPONSIVE DEVICE” appears on Kenwood Receiver?
If you see “UNRESPONSIVE DEVICE” appear on your Kenwood Receiver, ensure the USB device is not malfunctioning, then reattach the USB device.
What to do if “UNSUPPORTED DEVICE” appears on Kenwood DPX-M3300BT?
If you see “UNSUPPORTED DEVICE” appear on your Kenwood Receiver, verify that the connected USB device is compatible with the unit and that the file systems are in supported formats. Also, try reattaching the USB device.
Why the source does not change to “USB” on Kenwood DPX-M3300BT Receiver?
If the source does not change to “USB” when you connect a USB device while listening to another source on your Kenwood Receiver, the USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. If this does not solve the problem, turn the power off and on (or reset the unit) before replacing with another USB device.
How to troubleshoot Kenwood Receiver that does not work?
If your Kenwood Receiver is not working at all, try resetting the unit.
Why voice calling method is not successful on Kenwood DPX-M3300BT Receiver?
If the voice calling method is not successful on your Kenwood Receiver: - Use voice calling method in a more quiet environment. - Reduce the distance from the microphone when you speak the name. - Make sure the same voice as the registered voice tag is used.
What does “USB HUB IS NOT SUPPORTED” mean on Kenwood Receiver?
If you see “USB HUB IS NOT SUPPORTED” appear on your Kenwood Receiver, this unit cannot support a USB device connected via a USB hub.
What does “COPY PRO” mean on Kenwood Receiver?
If you see “COPY PRO” appear on your Kenwood Receiver, it indicates that a copy-protected file is being played from the USB.
What does “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON” mean on Kenwood Receiver?
If the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON” appears on your Kenwood Receiver, check to be sure the terminals of the speaker wires are insulated properly, then turn the power on again.
Why Bluetooth pairing cannot be made on Kenwood Receiver?
If you are having trouble with Bluetooth pairing on your Kenwood Receiver, ensure you have entered the same PIN code on both the unit and the Bluetooth device. If the problem persists, delete the pairing information from both the unit and the Bluetooth device, then perform pairing again.
Warnings and safety guidelines specific to the remote control unit.
Identification and explanation of the unit's front panel controls and display window.
Instructions for fundamental tasks like powering on/off, adjusting volume, and changing sources.
Detailed description of the remote control, including its functions and battery replacement.
Guide for the initial setup process, including language selection and crossover type.
Step-by-step instructions for configuring the unit's clock and date settings.
How to adjust additional optional settings available for the unit.
Procedures for updating the unit's firmware and resetting it to factory default settings.
Instructions for selecting and configuring the speaker crossover type.
Methods for finding and selecting radio stations, including direct access tuning.
Options for optimizing radio reception and tuning, such as seek mode and mono sound.
Explanation of RDS features like AF SET, TI, and PTY Search for enhanced radio information.
Step-by-step guide on how to connect USB drives and iPod/iPhone devices.
Performing essential actions like playback control, file selection, repeat, and random play.
Instructions on how to choose the desired USB drive for music playback.
Various methods for searching and selecting music files, including direct search and skip search.
How to efficiently search for music files using alphabetical order.
Guide for connecting and playing audio from external devices via the auxiliary input.
Steps to assign custom names to connected external audio devices for easier identification.
Instructions for installing and connecting the KENWOOD Remote app to your device.
Configuration options for the KENWOOD Remote app, including device selection and status.
Overview of Bluetooth connectivity, supported profiles, codecs, and microphone connection.
Step-by-step guide for pairing a new Bluetooth device with the unit.
Managing incoming/outgoing calls, volume control, and hands-free modes.
Adjusting microphone gain, noise reduction, echo cancellation, and auto-answer settings.
Procedures for making calls via history/phonebook and general call handling.
Managing contacts, using voice recognition, and storing numbers for quick access.
Configuring Bluetooth modes, managing paired devices, and performing connectivity tests.
How to play audio from Bluetooth devices and switch between multiple connected audio sources.
Adjusting sound equalization using manual settings or selecting preset EQ modes.
Enhancing bass response and adjusting loudness for optimal sound at low volumes.
Configuring subwoofer output, fader, balance, volume offset, and sound effects.
Setting speaker size, crossover frequencies, slopes, and phase for optimal audio performance.
Specific configuration parameters for 2-way and 3-way crossover settings.
Adjusting speaker delay times and configuring vehicle-specific settings for sound staging.
Procedure for automatically calculating speaker delay times based on their placement.
Instructions for setting the display dimmer and changing general display settings.
Adjusting display colors, brightness levels, text scrolling, clock display, and demo mode.
Steps to connect the steering remote and configure its control key functions.
How to reset the learned steering remote control key assignments to their default values.
Critical safety warnings and cautions to follow during the installation and connection process.
Step-by-step guide for the fundamental process of installing the unit into the vehicle dashboard.
List and identification of parts included in the installation kit.
Specific instructions for installing the unit in Toyota car models, including trim plate usage.
How to connect external amplifiers via output terminals and the microphone input.
Detailed diagram illustrating all necessary wiring connections for power, speakers, and remote control signals.
Guidance on cleaning the unit, finding firmware updates, and checking compatible item lists.
Information on supported USB devices, iPod/iPhone models, and playable file systems.
A list of available preset color options for customizing the unit's display illumination.
How to cycle through different display information sources for radio and media playback.
Solutions for common problems like no sound, wiring errors, and unit malfunctions.
Troubleshooting steps for issues related to USB/iPod connectivity and Bluetooth pairing/performance.
Specific troubleshooting for Bluetooth audio interruptions, control problems, and connection instability.
Technical details regarding the FM/AM tuner sensitivity, frequency response, and USB standards.
Technical data for Bluetooth version, frequency range, communication range, and auxiliary input specifications.
Technical details covering audio output power, impedance, voltage, installation size, and unit weight.
Information regarding software licenses, trademarks, and usage rights pertaining to the product.
General| DIN size | 2 DIN |
|---|---|
| Clock mode | 12h/24h |
| Output power | 200 W |
| Product color | Black |
| Ready for iPod | Yes |
| Frequency range | 20 - 20000 Hz |
| Disc types supported | No |
| Audio output channels | 4.0 channels |
| Equalizer bands quantity | 13 |
| Maximum power per channel | 50 W |
| Signal-to-Noise Ratio (SNR) | 64 dB |
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Display type | LCD |
| Illumination color | Multi |
| Display number of lines | 3 lines |
| USB version | 2.0 |
| Bluetooth range | 10 m |
| Bluetooth version | 4.2 |
| USB port position | Front |
| Bluetooth profiles | AAC, SBC |
| Line outputs (RCA) | 2 |
| USB ports quantity | 1 |
| Cables included | DC |
| Operating temperature (T-T) | -10 - 60 °C |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 24 |
Weight and Dimensions| Depth | 111 mm |
|---|---|
| Width | 182 mm |
| Height | 100 mm |
| Weight | 1000 g |
To Next Page
