To Next PageTo Next PageWhy can’t I control my Kenwood digital audio player from the main unit or remote of the Kenwood Stereo System?
If your Kenwood digital audio player cannot be controlled from the main unit or remote control unit, connect it using the special connection cable (optional). Also, check if a compatible model is connected.
How to fix noise interference with radio reception on my Kenwood Stereo System?
To minimize noise interference with radio reception on your Kenwood Stereo System, install the outdoor antenna away from the road, turn off electric appliances installed near the system, and position the system away from any TV set.
How to fix Kenwood K-323-R if preset stations cannot be called?
If you cannot call preset stations on your Kenwood Stereo System, try presetting the radio stations again using AUTO MEMORY. You can also manually preset stations with receivable frequencies.
How to fix no sound on Kenwood Stereo System?
If your Kenwood Stereo System has no sound output, try the following: * Ensure the cords are correctly reconnected. * Increase the volume. * Deactivate any muting features. * If headphones are connected, unplug them.
Why can't I tune radio stations on my Kenwood K-323-R Stereo System?
If you're having trouble tuning into radio stations on your Kenwood Stereo System: * Make sure the antenna(s) are connected properly. * Select the correct tuning band (tuning mode). * Ensure you are tuning into the frequency of the desired station.
Why can't I activate the timer on my Kenwood K-323-R Stereo System?
If the timer cannot be activated on your Kenwood Stereo System, set the time of the day (if the [STANDBY/TIMER] indicator is flashing in orange). Also, set the On time and Off timer of the program timer.
What to do if the [STANDBY/TIMER] light flashes red on my Kenwood K-323-R Stereo System and there is no sound?
If the [STANDBY/TIMER] light is flashing red on your Kenwood Stereo System and no sound is output, it may indicate an internal fault. Turn the system OFF, unplug the power cord, and call for service.
Why is there no CD audio output from my Kenwood Stereo System?
If there is no CD audio output from your Kenwood Stereo System, try pressing [CDE]. Also, try cleaning the disc.
What to do if my Kenwood K-323-R Stereo System has no sound output?
If there is no sound coming from your Kenwood Stereo System, try the following: ensure the cords are properly reconnected, increase the volume, cancel any muting settings, and make sure headphones are unplugged.
Why timer cannot be activated on Kenwood K-323-R?
If the timer on your Kenwood Stereo System cannot be activated: * Ensure the time of day is set (the [STANDBY/TIMER] indicator may be flashing orange if it isn't). * Set both the On time and Off timer for the program timer.
General| Brand | Kenwood |
|---|---|
| Model | K-323-R |
| Tuner Bands | FM |
| Frequency Response | 20Hz - 20kHz |
| Speaker Load Impedance | 8 ohms |
