To Next PageTo Next PageHow to tune radio stations on my Kenwood K-323-R?
To tune radio stations on your Kenwood Stereo System, connect the antenna(s), select the correct tuning band (tuning mode), and tune into the frequency of the desired station.
Why timer cannot be activated on Kenwood K-323-R?
If the timer on your Kenwood Stereo System cannot be activated: * Ensure the time of day is set (the [STANDBY/TIMER] indicator may be flashing orange if it isn't). * Set both the On time and Off timer for the program timer.
How to fix preset stations not working on Kenwood K-323-R?
If you're unable to call up preset stations on your Kenwood Stereo System: * Try presetting the radio stations again using AUTO MEMORY. * Manually preset stations with receivable frequencies.
Why no sound from USB on Kenwood K-323-R?
If your Kenwood Stereo System isn't outputting sound when a USB flash memory or USB mass storage class compatible audio player is connected, please check the following: * Make sure the USB flash memory is properly inserted. * Verify the USB cable is correctly connected. * Confirm that the USB mass storage class compatible digital audio player is turned ON.
How to stop noise interference on Kenwood K-323-R Stereo System?
If noise is interfering with the reception on your Kenwood Stereo System: * Position the outdoor antenna away from the road. * Switch off any electrical appliances near the system. * Move the system away from any TV sets.
What to do if no sound from headphones on Kenwood K-323-R Stereo System?
If you're not getting any sound from your headphones with your Kenwood Stereo System: * Check that the headphone plug is fully and correctly inserted. * Increase the volume level. * Ensure that muting is canceled.
Why can't I tune radio stations on my Kenwood K-323-R Stereo System?
If you're having trouble tuning into radio stations on your Kenwood Stereo System: * Make sure the antenna(s) are connected properly. * Select the correct tuning band (tuning mode). * Ensure you are tuning into the frequency of the desired station.
How to fix no sound on Kenwood Stereo System?
If your Kenwood Stereo System has no sound output, try the following: * Ensure the cords are correctly reconnected. * Increase the volume. * Deactivate any muting features. * If headphones are connected, unplug them.
How to fix Kenwood K-323-R if preset stations cannot be called?
If you cannot call preset stations on your Kenwood Stereo System, try presetting the radio stations again using AUTO MEMORY. You can also manually preset stations with receivable frequencies.
How to fix noise interference with radio reception on my Kenwood Stereo System?
To minimize noise interference with radio reception on your Kenwood Stereo System, install the outdoor antenna away from the road, turn off electric appliances installed near the system, and position the system away from any TV set.
General| Brand | Kenwood |
|---|---|
| Model | K-323-R |
| Tuner Bands | FM |
| Frequency Response | 20Hz - 20kHz |
| Speaker Load Impedance | 8 ohms |
