Need help?Do you have a question about the Kenwood KAC-5203 and is the answer not in the manual?
Key precautions to prevent electrical shock, fire, and physical harm during operation.
Important warnings and cautions regarding mounting location and potential hazards.
Crucial warnings about preventing fires caused by short circuits during wiring.
Essential cautions for correct wiring, fuse replacement, and avoiding shorts.
Diagrams illustrating the correct connection of power, control, and ground wires.
Troubleshooting steps for problems like no sound or blown fuses.
Solutions for issues with low/high output levels or distorted sound quality.
Detailed technical specifications for power output, signal-to-noise ratio, and impedance.
Audio Specifications| RMS power per channel at 4 ohms | 0.55 W × 2 |
|---|---|
| Signal to Noise Ratio (Reference: 1 Watt into 4 ohms) | 80 dBA |
| Max Power Output | 350 W |
| Rated Power Output Normal (4 Ω) (20 Hz – 20 kHz, 0.08 % THD) | 0.55 W × 2 |
| Rated Power Output Normal (4 Ω) (DIN : 45324, +B = 14.4V) | 0.55 W × 2 |
| Rated Power Output Normal (2 Ω) (1 kHz, 0.8 % THD) | 0.75 W × 2 |
| Rated Power Output Bridged (4 Ω) (1 kHz, 0.8 % THD) | 150 W × 1 |
| Frequency Response (+0, –3 dB) | 5 Hz – 50 kHz |
| Sensitivity (rated output) MAX | 0.2 V |
| Sensitivity (rated output) MIN | 5.0 V |
| Signal to Noise Ratio | 95 dB |
| Input Impedance | 10 kΩ |
| Low Pass Filter Frequency (-12 dB/oct.) | 80 Hz |
Power| Operating Voltage | 14.4 V (11 – 16 V allowable) |
|---|---|
| Current Consumption | 17 A |
Weight and Dimensions| Dimensions (W × H × D) | 230 × 55 × 198 mm |
|---|---|
| Dimensions (W × H × D) inches | 9-1/16 × 2-3/16 × 7-13/16 inch |
| Weight | 1.7 kg (3.75 lbs) |
To Next Page
