To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-9103D and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Number of Channels | 1 |
| RMS Power at 4 Ohms | 500 W |
| RMS Power at 2 Ohms | 900 W |
| Minimum Impedance Unbridged | 1 Ohm |
| Signal to Noise Ratio | 100 dB |
| Low-Pass Crossover Frequency | 50 Hz - 200 Hz |
| Fuse Rating | 40A x 2 |
| Low Pass Filter | Yes |
Essential precautions against injury, fire, and equipment damage during installation and operation.
Guidelines for cleaning, preventing battery drain, and understanding the protection function.
Advice on proper wiring, fuse use, and selecting compatible speakers for optimal performance.
FCC compliance notes and instructions for environmentally responsible disposal of old equipment.
Step-by-step guide for mounting the unit, including required accessories and fittings.
Critical advice on selecting a suitable location to prevent overheating, damage, or interference.
Details on connecting RCA cables or speaker-level inputs from the source unit.
Guide for connecting power wires, ground, control wire, and speaker outputs to the amplifier.
Explanation of various controls including power, illumination, bass boost, filters, and sensitivity settings.
Guide to diagnose and resolve common issues like no sound, low output, or distorted sound.
Detailed technical data including power output, frequency response, impedance, and general operating parameters.
