To Next Page
K
Kevin MillerJul 27, 2025
What to do if my Kenwood Car Amplifier has no sound and the fuse is blown?
- DDonald DuarteJul 28, 2025
If your Kenwood Car Amplifier has no sound, or sound from only one side, and the fuse is blown, several factors could be at play. First, ensure all input and output cables are securely connected. Check the connections referring to the protection function section. If the protection circuit is activated, address the cause. Also, verify that the volume isn't set too high. Replace the fuse, and then lower the volume. Finally, inspect the speaker cord for any shorts; after fixing the short, replace the fuse.
General
