Kenwood KDC-152 Service Manual

SERVICE MANUAL
COPYRIGHT © 2011 JVC KENWOOD Corporation
No.WA001<Rev.001>
2011/10
B53-0892-00
CD RECEIVER
WA001<Rev.001>201110SERVICE MANUALB53-0892-00
KDC-152, KDC-153, KDC-153S
COPYRIGHT © 2011 JVC KENWOOD Corporation
MAIN UNIT NAME TDF PARTS No. TDF NAME
KDC-152
Hook
Illustration is KDC-152
TDF SPARE-PANEL
PbF
This product uses Lead Free solder.
This product complies with the RoHS directive for the European market.
M. sleeve assy
DC cord
Remocon unit (RC-405)
(QAL1303-001)
(GE34826-001A)
(QAM1335-001)
Tap screw (2x8)
Screw set
Trim plate
(QYSPSF2008MA)
(GE40536-001A)
(GE40578-001A) x2
(GE20274-001A)
KDC-152
KDC-153
KDC-153S
Y33-3370-27
Y33-3350-13
Y33-3370-28
TDF-1215D
TDF-153
TDF-153S
Tuner setting adjustment after replacing E2PROM
After replacing E2PROM (IC771 on ELECTRIC UNIT), tuner setting adjustment is needed.
The adjustment is that to perform the "TUNER Setting Adjustment Mode" in the TEST MODE.

Kenwood KDC-152 Specifications

FM Tuner Section

frequency range	87.9 MHz — 107.9 MHz
usable sensitivity	11.2 dBf (1.0 μV/75 Ω)
quieting sensitivity	19.2 dBf (2.5 μV/75 Ω)
frequency response	30 Hz — 15 kHz
signal-to-noise ratio (MONO)	63 dB
stereo separation	40 dB

AM Tuner Section

frequency range	530 kHz — 1 700 kHz
usable sensitivity	31 dBμ (36 μV)

CD Player Section

spindle speed	500 rpm — 200 rpm (CLV)
frequency response	20 Hz — 20 kHz
total harmonic distortion	0.01 %
signal-to-noise ratio	105 dB
dynamic range	90 dB

Audio Section

maximum output power	50 W × 4
full bandwidth power	22 W × 4
speaker impedance	4 Ω — 8 Ω
tone action bass	100 Hz ±8 dB
tone action middle	1 kHz ±8 dB
tone action treble	10 kHz ±8 dB
preout level / load (CD)	2 000 mV/10 kΩ
preout impedance	≤ 600 Ω

Auxiliary Input Section

frequency response	20 Hz — 20 kHz
input maximum voltage	1 200 mV
input impedance	10 kΩ

General

operating voltage	14.4 V
maximum current consumption	10 A
installation size	182 mm × 53 mm × 158 mm (7-3/16" × 2-1/16" × 6-1/4")
weight	2.9 lbs (1.3 kg)