M
matthewrosalesSep 2, 2025
Why is radio reception poor on my Kenwood KDC-153R Car Receiver?
- LLeslie WillisSep 2, 2025
If you are experiencing poor radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected.
To Next PageTo Next PageWhy is radio reception poor on my Kenwood KDC-153R Car Receiver?
If you are experiencing poor radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected.
Why is the playback intermittent or sound skipping on my Kenwood Car Receiver?
If the playback is intermittent or the sound skips on your Kenwood Car Receiver, turn off the power saving mode on the Android device.
What to do if my Kenwood KDC-153R Car Receiver displays “READING” keeps flashing?
If your Kenwood Car Receiver displays “READING” keeps flashing, avoid using too many hierarchical levels and folders. Also, try reloading the disc or reattaching the USB device.
What to do if my Kenwood KDC-153R Car Receiver displays “NO MUSIC”/“ANDROID ERROR”?
If your Kenwood Car Receiver displays “NO MUSIC” or “ANDROID ERROR”, ensure that your Android device contains playable audio files. If it does, try reconnecting the Android device or restarting it.
What to do if my Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing?
If your Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing, try reconnecting the Android device. If the USB connection does not work, connect the Android device through the auxiliary input jack.
What to do if my Kenwood Car Receiver displays “PLEASE EJECT”?
If your Kenwood Car Receiver shows “PLEASE EJECT”, reset the unit.
What to do if my Kenwood KDC-153R Car Receiver says “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of THEN PWR ON”, turn the power off, check the wiring, and then turn the power back on.
Why sound cannot be heard on my Kenwood Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, first, adjust the volume to the optimum level. If the issue persists, check the cords and connections to ensure they are properly connected.
General| Tuner | FM/AM |
|---|---|
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | No |
| USB Input | Yes |
| Bluetooth | No |
| Display Type | LCD |
| Detachable Faceplate | Yes |
| AUX Input | Yes |
| Remote Control | Optional |
| Channels | 4 |
| Maximum output power | 4 x 50W |
| RMS Power Output | 22W x 4 |
| Pre-out voltage | 2.5V |
| Number of preset stations | 18 FM, 6 AM |
