A
Anthony YoungSep 13, 2025
What does “ADD ERROR” mean on my Kenwood KDC-168U?
- NNicole LeSep 13, 2025
If your Kenwood Car Receiver displays “ADD ERROR”, new station creation was unsuccessful.
To Next PageTo Next PageWhat does “ADD ERROR” mean on my Kenwood KDC-168U?
If your Kenwood Car Receiver displays “ADD ERROR”, new station creation was unsuccessful.
What to do if my Kenwood KDC-168U Car Receiver says “READ ERROR”?
If your Kenwood Car Receiver displays “READ ERROR”, try copying the files and folders onto the USB device again. If the problem continues, reset the USB device or try using a different USB device.
How to fix no sound on my Kenwood Car Receiver?
If you can't hear any sound from your Kenwood Car Receiver, try these steps: First, make sure the volume is at a suitable level. Then, check all the cords and connections to ensure they are properly connected. Finally, clean the connectors to remove any dirt or debris that might be interfering with the sound.
Why is the radio reception poor on my Kenwood Car Receiver?
If the radio reception on your Kenwood Car Receiver is poor, ensure the antenna is firmly connected.
What to do if my Kenwood KDC-168U Car Receiver does not work?
If your Kenwood Car Receiver isn't working, try resetting the unit.
Why don't tracks play as intended on my Kenwood KDC-168U Car Receiver?
If tracks on your Kenwood Car Receiver do not play back as you intended, note that the playback order is determined when files are recorded.
Why does “READING” keep flashing on my Kenwood Car Receiver?
If “READING” keeps flashing on your Kenwood Car Receiver, avoid using too many hierarchical levels or folders.
Why does “NO DEVICE” or “READING” keep flashing on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing: * Switch off the developer options on the Android device. * Reconnect the Android device. * If the problem continues, the connected Android device may not support [BROWSE MODE].
What does “NA DEVICE” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NA DEVICE”, connect a supported USB device and check the connections.
What does “ANDROID ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “ANDROID ERROR” or “NA DEVICE”, try reconnecting your Android device. If the issue persists, restart your Android device.
General| Power Output (Peak) | 50W x 4 |
|---|---|
| RMS Power Output | 22W x 4 |
| Tuner Type | AM/FM |
| Bluetooth | No |
| USB Port | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| RDS | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| CD Player | Yes |
| Channels | 4 |
| Presets | 18 FM, 6 AM |
| Dimensions | 7 x 2 x 5 in |
Methods for finding radio stations using tuning or scanning.
How to begin playing audio from connected media sources.
How to connect and begin streaming iHeartRadio.
Adjusting sound levels like Bass, Mid, Treble, and Subwoofer.
Advanced equalizer settings for custom sound profiles.
Step-by-step guide for fitting the unit into a dashboard.
Diagrams and instructions for connecting the unit's wires.
Technical details for FM and AM radio reception.
Technical specifications for CD playback functionality.
Specifications related to audio output, power, and tone controls.
