To Next PageTo Next PageWhat does “HF ERROR 07” mean on Kenwood KDC-348U?
If “HF ERROR 07” appears on your Kenwood Car Receiver, turn off the power and on again. If the message still appears, press the reset button on the control unit.
What does “CONNECT NG” mean on Kenwood KDC-348U Car Receiver?
If “CONNECT NG” appears on your Kenwood Car Receiver, the unit cannot be connected to the device.
What does “NO DEVICE” mean on Kenwood Car Receiver?
If “NO DEVICE” appears on your Kenwood Car Receiver, connect a USB device and change the source to USB again.
What does “PIN CODE NG” mean on Kenwood KDC-348U?
If “PIN CODE NG” appears on your Kenwood Car Receiver, the PIN code is wrong.
What does “NO RECORD” mean on Kenwood Car Receiver?
If “NO RECORD” appears on your Kenwood Car Receiver, the voice tag is not registered in the phone book.
What does “NO VOICE” mean on Kenwood KDC-348U Car Receiver?
If “NO VOICE” appears on your Kenwood Car Receiver, there is no call.
What does “DEVICE FULL” mean on Kenwood Car Receiver?
If “DEVICE FULL” appears on your Kenwood Car Receiver, 5 Bluetooth devices have already been registered, and no more can be added.
Why is voice not recognized on my Kenwood KDC-348U Car Receiver?
If your Kenwood Car Receiver is not recognizing your voice, close the vehicle windows to reduce noise. Speak into the microphone a little more loudly and naturally. Note that only the voice of the person who registered the voice tag can be recognized.
Why is the disc sound interrupted on my Kenwood KDC-348U Car Receiver?
If the disc sound is sometimes interrupted on your Kenwood Car Receiver, stop playback while driving on rough roads. You can also try changing the disc or checking the cords and connections.
What to do if “PROTECT” appears on my Kenwood KDC-348U?
If “PROTECT” appears on your Kenwood Car Receiver and no operations can be performed, ensure the terminals of the speaker leads are properly covered with insulating tape, and then reset the unit. If the issue persists, it may require professional attention.
General| Model | KDC-348U |
|---|---|
| Brand | Kenwood |
| Category | Car Receiver |
| Channels | 4 |
| Tuner | AM/FM |
| RDS | Yes |
| CD Playback | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| USB Input | Yes |
| Aux Input | Yes |
| Display Type | LCD |
| Button Illumination | Red |
| Preout Voltage | 2.5V |
| Bluetooth | No |
| Detachable Face | Yes |
| Remote Control | Yes |
| Max Power Output | 50W x 4 |
| RMS Power Output | 22 Watts x 4 Channels |
| Preset Stations | 24 (18 FM/6 AM) |
Essential safety warnings and precautions for operating the unit safely.
Steps for attaching and detaching the unit's faceplate.
Performing initial settings before operating the unit.
How to connect and play music from USB devices or iPods.
Initial steps to connect a cell-phone for hands-free operation.
Step-by-step guide to pair cell-phones with the unit.
Various methods for making phone calls using the hands-free system.
Specifics of the easy pairing function for Bluetooth devices.
Methods for pairing Bluetooth devices with the unit.
Comprehensive settings for managing Bluetooth connections and audio.
Adjusting audio parameters like bass, treble, subwoofer, and EQ modes.
List of included parts and important safety warnings for installation.
Step-by-step guide for installing the unit in a vehicle.
Detailed diagram showing all electrical connections for the unit.
Procedures for installing the unit using or without the mounting sleeve.
Solutions for common issues like no sound, error messages, and poor reception.
Further troubleshooting for USB, iPod, and Bluetooth connectivity problems.
Resolution for advanced Bluetooth errors and tuner-specific issues.
Detailed technical data for all unit sections and features.
