What to do if my Kenwood Car Receiver sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try these solutions: First, adjust the volume to make sure it's at an audible level. Next, inspect the cords and connections to ensure they are properly connected. Finally, clean the connectors to remove any dirt or debris that might be interfering with the sound.
What to do if Bluetooth pairing cannot be made on Kenwood Car Receiver?
If you're having trouble pairing a Bluetooth device with your Kenwood Car Receiver: * Ensure you've entered the same PIN code on both devices. * Try deleting the pairing information from both the receiver and the Bluetooth device, and then attempt the pairing process again.
What to do if setting/deleting the remote control ID is unsuccessful on Kenwood Car Receiver?
If setting or deleting the remote control ID is unsuccessful and you see “SET ERROR” or “DEL ERROR” on your Kenwood Car Receiver, turn the power off, then turn it back on, and try the operation again.
Why does my Kenwood Car Receiver say 'MISWIRING CHECK WIRING THEN PWR ON'?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Then, check to ensure the terminals of the speaker wires are properly insulated. Turn the power back on.
What does “CHECK ANTENNA” mean on my Kenwood Car Receiver and how to fix it?
If your Kenwood Car Receiver displays “CHECK ANTENNA”, it means you should check that the antenna and its connection are in good condition.
What to do if my Kenwood Car Receiver disc cannot be ejected?
If the disc cannot be ejected from your Kenwood Car Receiver, press and hold the M button to forcibly eject the disc, being careful not to drop it. If this does not solve the problem, reset the unit.
Why does my Kenwood Car Receiver say “NO SIGNAL”?
If your Kenwood Car Receiver displays “NO SIGNAL”, make sure the antenna is mounted outside the vehicle.
What does “NO MUSIC” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO MUSIC”, connect a USB device that contains playable audio files.
How to fix echo or noise during a phone conversation on my Kenwood Car Receiver?
If you experience echo or noise during phone conversations using your Kenwood Car Receiver, try the following: 1. Adjust the microphone unit’s position. 2. Check the [ECHO CANCEL] setting.
What does “USB HUB IS NOT SUPPORTED” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “USB HUB IS NOT SUPPORTED”, it means that the unit cannot support a USB device connected via a USB hub.
Emphasizes reading warnings, cautions, and safe driving practices.
Identifies components, covers basic operations like power, volume, and source selection.
Covers display, tuner, system, and source selection settings for various apps and inputs.
Explains station searching, tuning methods, and direct access tuning.
Steps to start playback and use controls like pause, seek, repeat, and random.
Controlling iPod/Android, selecting music drives, and streaming services like TuneIn Radio.
Selecting files, folders, and using Quick, Skip, and Alphabet search functions.
Setting up and using the KENWOOD Remote app for device control.
Steps to prepare, listen, create, save, search, bookmark, and delete Pandora stations.
Solutions for character display, file errors, device compatibility, and playback issues.
Fixes for Android audio output, playback modes, and Pandora station errors.
Solutions for station limits, connection errors, and license errors for streaming services.
Troubleshooting for SiriusXM channels, and Bluetooth connection/audio quality.
Solutions for voice calling, audio interruptions, device control, and connection errors.
Safety precautions and step-by-step guide for installing the unit.
Illustrates the wiring harness connections for power, speakers, and accessories.
Technical details for tuner, CD player, and USB connectivity.
Specs for Bluetooth version, frequency range, output power, and communication range.
Technical details for auxiliary input and audio pre-out levels.
Specs for Bluetooth, power, dimensions, weight, and operating conditions.
General| Type | Car Receiver |
|---|---|
| Brand | Kenwood |
| Model | KDC-BT32 |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| Android Music Playback | Yes |
| iPhone/iPod Music Playback | Yes |
| Subwoofer Control | Yes |
| Display Type | LCD |
| Display Color | White |
| Radio Tuner | AM/FM |
| RMS Power Output | 22W x 4 |
| Max Power Output | 50W x 4 |
| Button Illumination | Variable Color |
To Next Page