Function
of
KDC-X993
KDC-HD942U/ KDC-X693/ KDC-MP642U
with
KCA-BT200
(Optional
Accessory)
Bluetooth Setup
Registering Bluetooth device
To
make your Bluetooth device (cell-phone) usable
with this unit, you need
to
register
it
(pairing).
You
can
register
up
to
five Bluetooth devices
to
this unit.
When
registering
from
Bluetooth
devices
1 Turn
on
the
control
unit.
2 Start
registering
a
unit
by
operating
the
Bluetooth
device
By
operating the Bluetooth device, register the
hands-free unit (pairing).
Select
"KENWOOD
BT
CD/R-2P2"I"KENWOOD
BT200"
from the list
of
connected units.
3 Enter a PIN code
Input
the
PIN
code registered
as
mentioned in
<Registering
PIN
Code> (page 36).
Check
that registration
is
complete
on
the
Bluetooth device.
4
By
operating
the
Bluetooth device, start hands-
free connection.
When
registering
from
this
unit
Move
to
the
next
digit.
Delete
the
last
digit.
5 Transmit
the
PIN code
Press
the
Control
knob
for
at
least 1 second.
If"Pairing
Success"
is
displayed, registration
is
completed.
6 Return
to
the
device
list
Press
the
Control knob.
7 Exit
Bluetooth
device
registration
mode
Press
the
[FNC]
button.
(::)...
G
• This
unit
allows
up
to
eight digits
to
be
input
for a
PIN
code. If a
PIN
code cannot be
input
from this unit, it
can
be
input
from the Bluetooth device.
•
If
there
are
5 or more Bluetooth devices registered, you
cannot register a
new
Bluetooth device.
• If the error message appears even
though
the
PIN
code
is
correct, try <Registering Special Bluetooth device>
(page
36).
Registering Special Bluetooth device
Allow registration
of
a special device
that
cannot be
registered normally (pairing).
1 Select Special device
registration
mode
Select "MENU" >
"SPCL
DVC
Select':
For
how to select Function Control item,
refer
to
<Function Control> (page
6).
2 Enter Special device
registration
mode
Press
the
Control
knob
for
at least 1 second.
Alist
is
displayed.
3 Select a device
name
Turn
the
Control
knob
and push
the
center
when
the
desired device name
is
displayed.
If"Completed"
is
displayed, registration
is
completed.
4 Go
through
the
procedure
of
<Registering
Bluetooth
device> (page 36) and complete
the
registration (pairing).
Cancelling Special device
registration
mode
Press
the
[FNC]
button
for
at
least 1 second.
e
• If the device name
is
not
in the list, select "Other Phones':
Registering PIN Code
By
operating the Bluetooth device, specify the
PIN
code necessary for registering this unit.
1 Select
PIN
code
edit
mode
Select "MENU" >"PIN Code Edit':
For
how to select Function Control item,
refer
to
<Function Control> (page
6).
2 Enter PIN code
edit
mode
36 I KDC-X993/ KDC-HD942U/
KDC-X693/
KDC-MP642U
To Next Page
Loading...
Need help?
General
