To Next Page
R
Robert BrownSep 9, 2025
What does 'PAIRING NG' mean on Kenwood KDC-U4549 Car Receiver?
- MMark JohnsonSep 9, 2025
The message 'PAIRING NG' on your Kenwood Car Receiver indicates a pairing error.
What does 'PAIRING NG' mean on Kenwood KDC-U4549 Car Receiver?
The message 'PAIRING NG' on your Kenwood Car Receiver indicates a pairing error.
What does 'DEVICE FULL' mean on Kenwood Car Receiver?
The message 'DEVICE FULL' on your Kenwood Car Receiver means that the maximum number of Bluetooth devices (5) have already been registered, and no more can be added.
What to do if my Kenwood KDC-U4549 radio reception is poor?
If you're experiencing poor radio reception or static noise with your Kenwood Car Receiver, try these steps: * Ensure the antenna is firmly connected. * Extend the antenna fully.
How to fix Kenwood KDC-U4549 Car Receiver when sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try the following: * Adjust the volume to a suitable level. * Check the connections of the cords.
What does 'COPY PRO' mean on Kenwood KDC-U4549?
The message 'COPY PRO' on your Kenwood Car Receiver indicates that a copy-protected file is being played.
What does 'NA FILE' mean on my Kenwood KDC-U4549 Car Receiver?
The message 'NA FILE' on your Kenwood Car Receiver indicates that the unit is attempting to play an unsupported audio file.
Why does my Kenwood KDC-U4549 say 'IN' flashes?
The flashing 'IN' on your Kenwood Car Receiver indicates that the CD player is not operating correctly. Reinsert the disc properly. If the condition does not improve, it may require professional attention.
What does 'TOC ERROR' mean on my Kenwood Car Receiver?
The 'TOC ERROR' message on your Kenwood Car Receiver suggests an issue with the disc. This can occur if: * The CD is quite dirty. * The CD is upside-down. * The CD is scratched a lot. Try using another disc instead.
What does 'NO MUSIC' or 'ERROR 15' mean on Kenwood KDC-U4549 Car Receiver?
The message 'NO MUSIC' or 'ERROR 15' on your Kenwood Car Receiver indicates that the connected USB device or inserted SD card does not contain playable audio files. Ensure that the media played has data recorded in a format that the unit can play.
Why does my Kenwood KDC-U4549 Car Receiver say 'READ ERROR'?
The 'READ ERROR' message on your Kenwood Car Receiver suggests an issue with reading the USB device. Try these solutions: * Copy the files and folders for the USB device again. * If the error persists, initialize the USB device or try using a different USB device.
General| Brand | Kenwood |
|---|---|
| Model | KDC-U4549 |
| Category | Car Receiver |
| Language | English |
Procedures for cleaning the unit and connectors.
Explanation of the Class 1 Laser Product label.
Instructions for removing and installing the detachable front panel.
Steps to reset the unit to factory settings using the reset button.
Instructions for preparing the remote control for first-time use.
Steps to disable the automatic display demonstration mode.
Instructions for enabling or disabling the demonstration mode.
Procedure for setting the current time on the unit.
How to alter the FM/AM tuning frequency increments.
Adjusting radio-related settings like seek mode and auto memory.
Steps to insert a disc and begin playback.
Connecting and playing music from USB or iPod devices.
Proper procedure for disconnecting USB/iPod devices.
Instructions for using the CD changer function.
Steps to insert and play music from an SD card.
Proper procedure for removing an SD card.
How to select repeat, random, and scan playback options.
Navigating and selecting specific audio files or tracks.
Alphabetical search and direct music search for iPod content.
Using the remote to directly search CD changer discs.
Creating and managing playlists for iPod content.
How to play and remove songs from the created playlist.
Switching between unit and iPod-native control for iPod playback.
Adjusting iPod playback settings like skip search ratio.
Precautions for handling discs and incompatible types.
Supported audio file formats, USB, SD, and iPod/iPhone models.
Information about the KENWOOD Music Editor software.
Initial steps to connect a cell-phone for hands-free operation.
Steps to register a Bluetooth device for hands-free connection.
Instructions for initiating calls using various methods.
How to call from phone book or call logs.
Manually dialing, using preset speed dials, and registering them.
Making calls using voice recognition commands.
Answering, rejecting, disconnecting, and managing call waiting.
Steps to download phone book data from a cell-phone.
Simplified procedure for pairing new Bluetooth devices.
Steps for pairing a cell-phone for the first time.
How to remove previously paired Bluetooth devices.
Detailed steps for pairing Bluetooth devices from either end.
Procedure for pairing special or non-standard Bluetooth devices.
Choosing which paired Bluetooth device to connect.
Registering voice tags for phone book names and types.
Setting or changing the Bluetooth pairing PIN code.
Configuring automatic call answering settings.
Information about cell-phone compatibility and Bluetooth profiles.
Steps to download text messages from the cell-phone.
How to read downloaded text messages on the unit.
Adjusting audio parameters like bass, treble, and EQ settings.
Configuring general settings like display, AUX names, and clock.
List of components and step-by-step guide for installation.
Critical safety precautions and cautions during installation.
Tips for optimal Bluetooth signal reception.
Information on using optional Bluetooth adapters.
Steps for installing the unit in the dashboard, including specific methods.
Procedure for detaching the unit from the dashboard.
Troubleshooting common Bluetooth connection and recognition issues.
