To Next PageTo Next PageWhy does my Kenwood KDC-U356 Car Receiver say “PROTECT”?
If the Kenwood Car Receiver displays “PROTECT”, ensure the speaker wire terminals are properly insulated. Then, reset the unit. If the problem persists, it may require professional attention.
What to do if my Kenwood Car Receiver sound cannot be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try the following: First, adjust the volume to a suitable level. Second, check all cords and connections to ensure they are properly connected. Third, clean the connectors.
What does “NO DISC” mean on my Kenwood KDC-U356 Car Receiver?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
What does “NA FILE” mean on my Kenwood KDC-U356?
If your Kenwood Car Receiver displays “NA FILE”, ensure the disc contains supported audio files.
What does “TOC ERR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “TOC ERR”, make sure the disc is clean and correctly inserted.
What does “READ ERR” mean on my Kenwood KDC-U356?
If your Kenwood Car Receiver shows “READ ERR”, copy the files and folders onto the USB device again. If the issue continues, reset the USB device or try using a different USB device.
What does “USB ERR” mean on my Kenwood KDC-U356 Car Receiver?
If your Kenwood Car Receiver displays “USB ERR”, remove the USB device, turn the unit off, and then turn it back on. If that doesn't work, try connecting a different USB device.
What does “NO DVICE” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NO DVICE”, connect a USB device and switch the source to USB again.
What does “NA DVICE” mean on my Kenwood KDC-U356?
If your Kenwood Car Receiver displays “NA DVICE”, connect a supported USB device and check the connections.
What does “iPod ERR” mean on my Kenwood KDC-U356?
If your Kenwood Car Receiver displays “iPod ERR”, try reconnecting the iPod. If the error persists, reset the iPod.
General| Brand | Kenwood |
|---|---|
| Model | KDC-U356 |
| Category | Car Receiver |
| Language | English |
General warnings for safe driving and cautions for operation.
Guidelines for safe use and battery replacement of the remote control.
Instructions for cleaning the faceplate, connector, and audio discs.
Overview of the unit's front panel buttons, knobs, and display window.
Using the remote control and performing a system reset.
Step-by-step instructions for replacing the remote control battery.
Steps to cancel the initial demonstration mode.
How to set the unit's clock and configure initial system settings.
Explanation of various initial settings like Preset, Key Beep, and TDF-Alarm.
Methods for searching for radio stations manually or automatically.
Using the remote control to directly access radio frequencies.
Adjusting radio reception modes (LO.SEEK, SEEKMODE) and memory settings.
Changing the frequency step for FM and MW bands for specific models.
General steps to start playback for CD, USB, and iPod sources.
Connecting a USB mass storage device for music playback.
Connecting and controlling an iPod or iPhone for music playback.
Searching for tracks or files by number using the remote control.
How to search for songs by name when using an iPod.
Managing repeat play and random play functions for different media types.
Setting file skip ratio and enabling automatic muting during phone calls.
Connecting an external audio player via AUX and starting playback.
Assigning a custom name to the AUX input source for easier identification.
Adjusting the display illumination brightness.
Configuring how text information scrolls on the display.
Adjusting Bass Boost, Loudness, Balance, and Fader for audio output.
Customizing Bass, Middle, Treble levels and selecting preset EQs.
Configuring HPF, LPF, Subwoofer Phase, and other advanced audio parameters.
Details on playable files, discs, USB devices, and iPod/iPhone compatibility.
Information on KENWOOD music software and searching for audio files.
Guidance for resolving issues like no sound, error messages, and unit malfunctions.
Technical specifications for radio reception and CD playback.
Technical specifications for USB, audio output, and auxiliary input.
Overall unit dimensions, weight, power requirements, and installation size.
Step-by-step guide for installing the unit into the vehicle's dashboard.
Alternative method for installing the unit without the standard mounting sleeve.
How to safely detach and remove the unit from the dashboard.
Wiring connections for KDC-3257UGM, KDC-3357URM, KDC-3157UAM models.
List of components provided for unit installation.
Specific wiring instructions for connecting to VW, Audi, or Opel vehicles.
Information on laser product safety and precautions for laser components.
Details on EMC Directive, EU Representative, and country-specific regulations.
