To Next PageTo Next PageWhat to do if “PROTECT” appears on my Kenwood KDC-U349?
If the Kenwood Car Receiver displays “PROTECT” and you can't do anything, make sure the speaker lead terminals are properly covered with insulating tape. Then, reset the unit.
Why is the radio reception poor on my Kenwood Car Receiver?
If you're getting poor radio reception or static noise on your Kenwood Car Receiver, ensure the antenna is firmly connected and pull the antenna out completely.
How to fix no sound on Kenwood KDC-U349 Car Receiver?
If there is no sound coming from the Kenwood Car Receiver, adjust the volume to a suitable level and check the cords and connections.
What to do if “USB ERROR” appears on Kenwood KDC-U349 Car Receiver?
If the Kenwood Car Receiver displays “USB ERROR”, first remove the USB device, turn the unit off, and then turn it back on. If the display doesn't change, try connecting a different USB device.
What to do if my Kenwood KDC-U349 Car Receiver says “NO DISC”?
If the Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
How to fix “iPod ERROR” on Kenwood KDC-U349 Car Receiver?
If the Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. Also, make sure that the iPod software is up to date.
Why does my Kenwood KDC-U349 Car Receiver say “NO DEVICE”?
If your Kenwood Car Receiver displays “NO DEVICE”, it means no USB device is connected. Connect a USB device and switch the source back to USB.
What does “TOC ERROR” mean on my Kenwood KDC-U349?
If the Kenwood Car Receiver displays “TOC ERROR”, the CD might be dirty, upside-down, or heavily scratched. Try cleaning the CD, inserting it correctly, or using a different disc.
What does it mean when “IN” flashes on Kenwood KDC-U349?
If your Kenwood Car Receiver displays “IN” flashing, the CD player isn't working right. Reinsert the disc properly.
What does “ERROR 99” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “ERROR 99”, the unit is malfunctioning. Press the reset button on the unit.
General| Type | Car Receiver |
|---|---|
| Channels | 4 |
| USB Port | Yes |
| AUX Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| Display Type | LCD |
| AM/FM Tuner | Yes |
| Speaker Impedance | 4-8 Ohms |
| USB Standard | USB 2.0 |
| File System | FAT16, FAT32 |
| MP3 Decoding Format | MPEG-1/2 Audio Layer-3 |
| WMA Decoding Format | Windows Media Audio |
| Preamp Outputs | 1 pair |
| RMS Power Output | 22 Watts |
| Peak Power Output | 50 Watts |
| AM Frequency Range | 530kHz - 1700kHz |
Details on using the KENWOOD Music Editor application for audio file management and playback.
Lists playable audio file types (MP3, WMA, AAC) and compatible media formats.
Declaration of conformity with EMC Directive and specific Turkish regulations for electrical equipment.
Essential safety warnings for unit operation, including volume and condensation.
Key information on preventing short circuits, handling condensation, and accessory requirements.
Instructions for attaching, detaching, and maintaining the unit's faceplate.
Step-by-step guide to reset the unit to factory default settings.
How to prepare the remote controller for first-time use and battery replacement.
Guidelines for protecting the faceplate from damage and environmental factors.
Explanation of the reset button's function and its impact on unit settings.
Information about the Class 1 laser product designation and its safety implications.
Instructions and warnings for replacing the battery in the remote controller.
Description of the unit's display and the meaning of various indicator lights.
Location and function of controls like the remote sensor, eject button, and faceplate release.
Detailed explanation of what specific indicator lights (ST, IN, ATT, EQ, etc.) signify.
How to utilize the MUTE lead for automatic audio muting during phone calls.
Comprehensive guide to button operations on both the main unit and remote controller.
How to turn the unit on/off and switch between available audio sources.
Controls for adjusting volume, confirming selections, and accessing settings menus.
Methods for changing radio bands, selecting folders/tracks, and fast-forwarding/reversing.
Procedures for canceling or setting the display demonstration mode.
Step-by-step instructions for setting the unit's clock.
Guide for performing initial settings before operating the unit.
Instructions for cleaning the unit and proper handling of discs.
Details on selectable radio settings like PRESET TYPE, KEY BEEP, and alarm functions.
How to tune radio stations and save them using SRC and BAND buttons.
Procedure to modify frequency steps for FM and MW bands, noting memory reset.
Options for LOCAL SEEK, SEEK MODE, AUTO MEMORY, MONO SET, PTY SEARCH, and RDS settings.
List of available program types for RDS searches on the KDC-4051UM model.
Using the remote controller for band selection and station tuning operations.
Steps to connect external audio devices via the AUX jack and adjust volume.
Instructions for inserting a disc and initiating playback, including pause/resume.
Method for directly searching for specific tracks using the remote control.
Using the remote to navigate folders, tracks, and files on discs, USB, and iPods.
Guide for connecting a USB device using the appropriate cable.
Instructions for connecting an iPod to the KDC-U449 unit.
Settings for repeating tracks, files, or entire discs/folders.
Options for playing music in a random order.
Activating scan play to preview the beginning of tracks.
Method for navigating and selecting specific audio content using Music Search.
Lists discs that cannot be used with the unit and why.
Important notes on connecting USB devices, file systems, and potential issues.
How to search for songs on an iPod using an alphabetical index.
Creating, playing, and deleting songs from the custom iPod playlist.
Switching between unit control (Hands Off) and iPod control (Hands On) for iPods.
Configuring skip search ratios and deleting the entire iPod playlist.
List of supported iPod and iPhone models and compatibility information.
Settings for subwoofer level, bass boost, system Q, and bass equalization.
Adjusting mid-range, treble frequencies, balance, fader, and subwoofer output.
Advanced settings for LPF, phase, supreme sound, and volume offset per source.
Customizing AUX names, clock sync, display dimmer, and text scroll behavior.
Managing RDS features like AF, RDS REG, and ATP SEEK for improved radio reception.
Solutions for sound absence, unit malfunction, poor reception, and error messages.
Remedies for disc read errors, unsupported file types, and copy-protected file issues.
Troubleshooting steps for USB/iPod connection errors, device recognition, and errors.
Explanations for display messages and issues with character rendering, including podcast counting.
List of components provided for the unit's installation.
Step-by-step instructions for installing the unit, including wiring and battery disconnection.
Critical safety precautions for power, wiring, and grounding during installation.
Important considerations for mounting, wiring, and fuse replacement during installation.
Diagrams illustrating speaker output connections for different models.
Details on connecting antenna, fuse holder, and control wires.
Instructions for connecting ignition, battery, and ground wires.
Table detailing pin functions for ISO connectors.
Guidance on wiring ISO connectors for VW, Audi, and Opel vehicles.
Steps for installing the unit using a mounting sleeve.
Instructions for direct installation without a mounting sleeve.
Procedure for safely detaching the unit from the car dashboard.
Detailed technical data for FM/AM tuners and the CD player.
Specifications for USB interface and audio output capabilities.
Specifications for auxiliary input, operating voltage, dimensions, and weight.
