How to fix no sound on Kenwood Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, first, adjust the volume to the desired level. If the sound is still not audible, check the cords and connections to ensure they are properly connected.
Why is the radio reception poor on my Kenwood KDC-U353?
If you are experiencing poor radio reception or static noise with your Kenwood Car Receiver, make sure the antenna is firmly connected. Also, try pulling the antenna out completely to improve the signal.
What to do if “PROTECT” appears on Kenwood KDC-U353?
If “PROTECT” is displayed and the Kenwood Car Receiver is not working, ensure the terminals of the speaker leads are properly covered with insulating tape. After checking the speaker leads, reset the unit.
How to fix “iPod ERR” on Kenwood Car Receiver?
If “iPod ERR” is displayed on your Kenwood Car Receiver, try reconnecting the iPod. If the error continues, reset the iPod.
What causes sound problems on Kenwood KDC-U353?
If you're experiencing issues like no sound, the unit not turning on, or incorrect information on the display of your Kenwood Car Receiver, the connectors might be dirty. Clean the connectors to resolve these problems.
Why is the sound interrupted on my Kenwood Car Receiver?
If the disc sound is sometimes interrupted on your Kenwood Car Receiver, stop playback while driving on rough roads. You can also try changing the disc or checking the cords and connections.
Why is my Kenwood KDC-U353 generating noise?
If noise is generated by your Kenwood Car Receiver, try skipping to another track or changing the disc.
How to solve “READ ERR” on Kenwood KDC-U353 Car Receiver?
If “READ ERR” appears on your Kenwood Car Receiver, copy the files and folders for the USB device again. If the error message is still displayed, initialize the USB device or try using a different USB device.
Why can't my Kenwood KDC-U353 play CD-R/CD-RW?
If CD-R/CD-RW discs cannot be played back or tracks cannot be skipped on your Kenwood Car Receiver, insert a finalized CD-R/CD-RW. Finalize the disc with the component you used for recording.
Why does “NO MUSIC” appear on Kenwood KDC-U353?
If “NO MUSIC” appears on your Kenwood Car Receiver, the connected USB device contains no playable audio file.
General| Power Output | 50 W x 4 |
|---|---|
| RMS Power Output | 22 W x 4 |
| Tuner | FM / AM |
| CD Playback | Yes |
| USB Input | Yes |
| Bluetooth | Yes |
| Display Type | LCD |
| Compatible Formats | MP3, WMA, AAC |
| AUX Input | Yes |
| Radio Data System (RDS) | Yes |
| Remote Control | Yes |
| Steering Wheel Control | Yes |
| CD-R/RW Playback | Yes |
| iPod Control | Yes |
| iPhone Control | Yes |
| Android Control | Yes |
| Subwoofer Control | Yes |
| EQ Settings | 13-band graphic EQ |
| Presets | 18 FM, 6 AM |
Key safety considerations for unit operation and handling.
Procedures for cleaning the unit and handling discs.
Instructions for removing and installing the faceplate.
Procedure to reset the unit to factory settings.
How to disable the automatic display demonstration.
How to enable or disable the display demonstration mode.
Step-by-step guide to setting the current time.
Steps for performing initial setup of the unit.
How to save favorite radio stations for quick access.
How to switch between FM, MW, LW, and SW bands.
How to search for and tune into radio stations.
Customizing various audio and radio settings.
How to connect and play audio from external devices via AUX.
Steps to insert a disc and begin playback.
Navigating and selecting audio content from discs or USB.
How to connect a USB storage device to the unit.
How to connect an Apple iPod to the unit.
Searching for songs on an iPod using alphabet input.
Setting repeat and random playback modes for audio.
Switching control between iPod and the unit.
Customizing iPod playback settings.
Initial setup and battery replacement for the remote.
Common operations using the remote control buttons.
Important warnings regarding remote control usage and battery safety.
Manually tuning to specific radio frequencies.
Quickly searching for specific tracks on discs or USB.
Adjusting audio parameters like subwoofer, bass, treble, and EQ.
Remedies for problems related to no sound or poor sound quality.
Solutions for the unit not turning on or displaying incorrect information.
Troubleshooting steps for CD playback issues.
List of components included with the unit.
Step-by-step guide for installing the unit.
Critical warnings related to car power and wiring.
Important notes and precautions during installation.
Visual guide for connecting speakers, power, and control wires.
Specific installation method for Japanese cars without the mounting sleeve.
Procedures for safely detaching the unit from the dashboard.
Detailed technical specifications for FM, AM, and LW tuners.
Technical details for audio output, USB interface, and codecs.
Information on the Class 1 laser product marking.
Regulatory compliance information and manufacturer details.
To Next Page
