To Next PageTo Next PageHow to resolve “READ ERR” on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “READ ERR”, copy the files and folders for the USB device again. If the error persists, initialize the USB device or try using a different USB device.
What to do if “PROTECT” appears on Kenwood KDC-U40R?
If the Kenwood Car Receiver displays “PROTECT” and no operations are possible, ensure the speaker lead terminals are properly covered with insulating tape. Then, reset the unit. If “PROTECT” persists, it may require professional attention.
What does “ERROR 99” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “ERROR 99”, press the reset button. If the error persists, it indicates a malfunction requiring professional service.
What to do if my Kenwood Car Receiver says “NO DISC”?
If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
What does “TOC ERR” mean on my Kenwood KDC-U40R Car Receiver?
If your Kenwood Car Receiver displays “TOC ERR”, the CD might be dirty, upside-down, or scratched. Try using another disc.
What to do if Kenwood Car Receiver displays “NO DVICE”?
If your Kenwood Car Receiver shows “NO DVICE”, connect a USB device and switch the source back to USB.
How to fix “iPod ERR” on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “iPod ERR”, try reconnecting or resetting the iPod.
What does “NA FILE” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NA FILE”, it means the unit is trying to play an audio file that is not supported.
Why is elapsed playing time not correct on my Kenwood KDC-U40R Car Receiver?
The elapsed playing time displayed on your Kenwood Car Receiver might be incorrect due to how the tracks were recorded.
Why do tracks not play back as intended on my Kenwood KDC-U40R?
The playback order on your Kenwood Car Receiver is determined when the files are recorded.
General| CD Player | Yes |
|---|---|
| USB Input | Yes |
| Bluetooth | No |
| Preamp Outputs | 2-channel |
| Preout Voltage | 2.5V |
| Preout Level | 2.5V |
| Frequency response | 20Hz - 20kHz |
| S/N ratio | 105 dB |
| Dynamic range | 93 dB |
| MP3 Decode | Yes |
| WMA Decode | Yes |
| FM Usable Sensitivity | 9.3 dBf |
| FM Quieting Sensitivity | 15.2 dBf |
| FM Frequency Response | 30Hz - 15kHz |
| Channels | 4 |
| RMS Power Output | 22W x 4 |
| AUX Input | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | No |
| Remote Control | Optional |
| Tuner | AM/FM |
| Display Type | LCD |
| FM Frequency Range | 87.5MHz - 108.0MHz |
| Power Output | 50 watts x 4 channels |
| FM Stereo Separation | 35dB (1kHz) |
General warnings and precautions for safe operation and to prevent damage to the unit and vehicle.
Steps for playing discs and connecting USB devices or Apple iPods.
Adjusting subwoofer, bass, mid, treble levels, frequencies, and EQ presets.
Remedies for no sound, 'PROTECT' errors, incorrect display, or unit non-operation.
List of parts, general installation steps, and critical safety warnings.
Important considerations for a safe and proper installation, including wiring and mounting.
