B
Brooke CurtisAug 28, 2025
What to do if I hear static noise on my Kenwood Car Receiver?
- BBrittany PerezAug 28, 2025
If you are hearing static noise while listening to the radio on your Kenwood Car Receiver, pull the antenna out all the way.
To Next PageTo Next PageWhat to do if I hear static noise on my Kenwood Car Receiver?
If you are hearing static noise while listening to the radio on your Kenwood Car Receiver, pull the antenna out all the way.
Why is the phone sound quality poor on my Kenwood KDC-X597 Car Receiver?
If the phone sound quality is poor when using your Kenwood Car Receiver, try reducing the distance between the unit and the Bluetooth device. Moving the car to a place where you can get better signal reception can also help.
What to do if the disc cannot be ejected from Kenwood KDC-X597?
If a disc cannot be ejected from your Kenwood Car Receiver, press and hold 0 to forcibly eject the disc. If this does not solve the problem, reset the unit.
How to fix Kenwood KDC-X597 Car Receiver when no sound can be heard?
If you cannot hear any sound from your Kenwood Car Receiver, try the following: Adjust the volume to the optimum level. Also, check the cords and connections to ensure they are properly connected. Cleaning the connectors may also resolve the issue.
What does “NO DEVICE” mean on Kenwood KDC-X597?
If “NO DEVICE” appears on your Kenwood Car Receiver, connect a USB device, and change the source to USB again.
What does “NA FILE” mean on Kenwood Car Receiver?
If “NA FILE” appears on your Kenwood Car Receiver, make sure the media contains supported audio files.
What does “NO DISC” mean on Kenwood KDC-X597?
If “NO DISC” appears on your Kenwood Car Receiver, insert a playable disc into the loading slot.
What does “READ ERROR” mean on Kenwood Car Receiver?
If “READ ERROR” appears on your Kenwood Car Receiver, copy the files and folders onto the USB device again. If this does not solve the problem, reset the USB device or use another USB device.
What does “USB ERROR” mean on Kenwood KDC-X597 Car Receiver?
If “USB ERROR” appears on your Kenwood Car Receiver, remove the USB device, turn the unit off, then turn it on again. You can also try to connect another USB device.
What does “iPod ERROR” mean on Kenwood Car Receiver?
If “iPod ERROR” appears on your Kenwood Car Receiver, try reconnecting the iPod. If that doesn't work, reset the iPod.
General| DIN Size | Single DIN |
|---|---|
| Channels | 4 |
| Built-in Amplifier | Yes |
| Tuner | AM/FM |
| Built-in Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| AAC Playback | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Steering Wheel Control | Yes |
| High-Pass Filter | Yes |
| Low-Pass Filter | Yes |
| Subwoofer Level Control | Yes |
| iPod Compatibility | Yes |
| Satellite Radio Ready | Yes |
| HD Radio | No |
| Type | Car Receiver |
| Faceplate Security | Detachable |
| RMS Power Output | 22 watts |
| Peak Power Output | 50W x 4 |
| Preamp Voltage | 2V |
| Equalizer | 13-band |
