C
cheryl21Sep 6, 2025
What does “N/A VOICE TAG” mean on my Kenwood Car Receiver?
- MMichael WallaceSep 6, 2025
If your Kenwood Car Receiver displays “N/A VOICE TAG”, ensure you are using the same voice as the registered voice tag.
To Next PageTo Next PageWhat does “N/A VOICE TAG” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “N/A VOICE TAG”, ensure you are using the same voice as the registered voice tag.
What does “DEVICE FULL” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “DEVICE FULL”, retry the operation.
Why is the radio reception so poor on my Kenwood Car Receiver?
If you're experiencing poor radio reception on your Kenwood Car Receiver, ensure that the [DEMO MODE] is set to [OFF]. Also, check that the antenna is firmly connected and fully extended.
How to fix sound issues on Kenwood Car Receiver?
If no sound is coming from your Kenwood Car Receiver, try the following: * Adjust the volume to the appropriate level. * Check the cords and connections to ensure they are secure. * Clean the connectors.
What to do if my Kenwood Car Receiver shows “READ ERROR”?
If your Kenwood Car Receiver displays “READ ERROR”, try copying the files and folders onto the USB device again. If the problem continues, reset the USB device or try using a different one.
What to do if my Kenwood Car Receiver says “NO DEVICE”?
If your Kenwood Car Receiver displays “NO DEVICE”, connect a USB device and switch the source back to USB.
What does “ADD ERROR” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “ADD ERROR”, new station creation was unsuccessful.
What does “CHECK DEVICE” mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “CHECK DEVICE”, check the Pandora application on your device.
Why is voice calling not working on my Kenwood Car Receiver?
If your voice calling method is not successful with the Kenwood Car Receiver, use voice calling in a quieter environment. Also, reduce the distance from the microphone when speaking the name.
How to reduce echo on Kenwood Car Receiver?
If you are experiencing echo or noise with your Kenwood Car Receiver, try adjusting the position of the microphone unit and check the [ECHO CANCEL] setting.
General| Brand | Kenwood |
|---|---|
| Model | KMM-BT308U |
| Category | Car Receiver |
| Language | English |
Provides an overview of the instruction manual and identifies the receiver models.
Details critical safety warnings, cautions, and unit cleaning instructions.
Identifies the unit's faceplate buttons, display, and remote control layout.
Guides on setting the clock and initial system configurations.
Explains how to tune stations and configure radio settings.
Details playback, file selection, and control modes for USB and iPod devices.
Covers file searching, skip ratios, and managing USB drives.
Guides on using AUX input and setting up Pandora streaming.
Details iHeartRadio setup, station searching, and management.
Explains SiriusXM features like Replay and Smart Favorites.
Covers SiriusXM channel locking and microphone setup.
Guides on pairing Bluetooth devices and performing connectivity tests.
Details call switching, volume adjustment, and voice recognition usage.
Covers accessing the phonebook, dialing, and system settings.
Guides on storing contacts, making calls, and configuring Bluetooth modes.
Details controlling Bluetooth audio and adjusting display settings.
Explains various audio settings like EQ, subwoofer, and sound adjustments.
Details on playable file formats and device compatibility.
Addresses common issues with Pandora and iHeartRadio.
Resolves problems with SiriusXM and Bluetooth connectivity.
Lists detailed specifications for tuner, USB, Bluetooth, and audio.
Provides instructions for installing and removing the unit.
Details wiring connections and lists installation parts.
