To Next PageTo Next PageHow to fix intermittent playback or sound skipping on my Kenwood KMM-BT35 Car Receiver?
If the playback is intermittent or the sound skips on your Kenwood Car Receiver, turn off the power saving mode on the Android device.
Why is sound being interrupted during Bluetooth playback on my Kenwood KMM-BT35 Car Receiver?
If the sound is being interrupted or skipped during playback of a Bluetooth audio player on your Kenwood Car Receiver: 1. Reduce the distance between the unit and the Bluetooth audio player. 2. Turn off, then turn on the unit and try to connect again. 3. Be aware that other Bluetooth devices might be trying to connect to the unit.
Why is there echo or noise during phone conversations on my Kenwood KMM-BT35 Car Receiver?
If you are experiencing echo or noise during a phone conversation using your Kenwood Car Receiver, adjust the microphone unit’s position and check the [ECHO CANCEL] setting.
What to do if the connected Bluetooth audio player cannot be controlled on my Kenwood Car Receiver?
If the connected Bluetooth audio player cannot be controlled with your Kenwood Car Receiver, check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP) and disconnect and connect the Bluetooth player again.
Why is the phone sound quality poor on my Kenwood Car Receiver?
If the phone sound quality is poor when using your Kenwood Car Receiver, reduce the distance between the unit and the Bluetooth device and move the car to a place where you can get a better signal reception.
What to do if voice calling method is not successful on my Kenwood KMM-BT35?
If the voice calling method is not successful on your Kenwood Car Receiver: 1. Use voice calling method in a more quiet environment. 2. Reduce the distance from the microphone when you speak the name. 3. Make sure the same voice as the registered voice tag is used.
General| DIN Size | 1 DIN |
|---|---|
| Power Output | 50 W x 4 |
| Peak Output | 50 W x 4 |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Radio Tuner | Yes |
| Radio Data System (RDS) | Yes |
| Display Type | LCD |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | Yes |
| AAC Playback | Yes |
| WAV Playback | Yes |
| ID3 Tag Display | Yes |
| Display Color | White |
| Steering Wheel Control | Yes |
| Faceplate Security | Detachable |
| Equalizer | 13-Band |
| Button Color | Variable |
Identifies the device as a Digital Media Receiver and its instruction manual.
Step-by-step guide to setting the current time on the unit.
Guide to setting the display language and other initial parameters.
Steps to pair a Bluetooth-enabled phone or device with the unit.
Adjustments for microphone gain, noise reduction, and echo cancellation.
Procedures for making calls via call history, phonebook, or number dialing.
Adjustments for equalizer, bass, treble, subwoofer, and sound reconstruction.
Solutions for general problems like no sound or unit not turning on.
Solutions for errors related to USB devices, iPods, and file playback.
Addresses common Bluetooth issues like pairing failures and audio interruptions.
Important safety warnings and precautions before and during unit installation.
Outlines the fundamental steps for installing the unit in a vehicle.
Illustrates the wiring connections for the unit and its components.
