Need help?Do you have a question about the Kenwood KR-A3080 and is the answer not in the manual?
General| Input Sensitivity (line) | 150 mV |
|---|---|
| Input sensitivity (MM) | 2.5 mV |
| Speaker load impedance | 4 - 16 ohms |
| Power Output | 80 W per channel (8 ohms) |
| Frequency Response | 20Hz to 20kHz |
| Total Harmonic Distortion (THD) | 0.08% |
| Output | Speaker output |
| Signal to noise ratio (line) | 88dB |
| Tuning Range | FM: 87.5 to 108 MHz, MW: 530 to 1700 kHz |
Selects the appropriate voltage for your region before connecting power.
Covers fire, electric shock, moisture, and symbol explanations.
Lists all included accessories with the unit.
Enables storing and recalling favorite radio stations.
Covers impedance matching and dual speaker terminals.
Allows control of connected KENWOOD components.
Diagrams and instructions for connecting audio/video devices.
Steps to reset the unit's microcomputer in case of malfunction.
Explains system control modes and remote operation of components.
Details speaker protection circuitry and correct wiring.
Guides on setting the impedance selector based on speaker resistance.
Instructions for connecting AM loop and outdoor antennas.
Instructions for connecting FM indoor and outdoor antennas.
Explanation of the FM DE-EMPHASIS/CHANNEL SPACE switch.
Identifies and describes all controls, indicators, and displays.
Explains the function of the standby indicator light.
Covers remote unit functions, battery installation, and usage.
Guides through powering on, selecting speakers, sources, and adjusting volume.
How to adjust bass, treble, and left/right volume balance.
Using headphones and the loudness function for low-volume listening.
How to mute the audio output using the MUTE key.
Steps to select a source and record onto a cassette deck.
Procedure for selecting bands and tuning to stations.
How to tune stations by directly entering their frequency.
Steps to save favorite stations using preset numbers.
Methods to access stored stations via direct entry or sequential scan.
Procedure to reset the unit when encountering malfunctions.
Troubleshooting guide for remote, amplifier, and tuner issues.
Detailed audio and tuner performance metrics for the US/Canada market.
Information on settings retained in memory and when they are erased.
Detailed audio and tuner performance metrics for international markets.
Information on settings retained in memory and when they are erased.
Provides FCC compliance information and installation guidelines.
Space to record unit details for future reference or service.
To Next Page
