Need help?Do you have a question about the Kenwood KR-A4030 and is the answer not in the manual?
General| Speaker Impedance | 4 - 16 ohms |
|---|---|
| Tuning range | FM, MW |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | 0.08% |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Signal-to-Noise Ratio | 75dB (MM) |
| Power Output | 30W per channel (8 ohms, 20Hz-20kHz, 0.08% THD) |
Essential warnings to prevent fire, electric shock, and damage from moisture.
Diagram and notes for connecting CD player, tape deck, and VTR to the receiver.
Connecting speaker systems A and B, with important notes on safe connection.
Instructions for connecting speakers, wiring, and setting the impedance selector.
Identification and function of main controls like power, volume, tuning, and input selectors.
Step-by-step guide for powering on, selecting sources, and adjusting volume.
Explanation of tone controls, balance, loudness, and headphone jack usage.
To Next Page
