To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KR-A5070 and is the answer not in the manual?
General| Power Output | 100 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity (line) | 150mV |
| Signal-to-Noise Ratio | 95dB (line) |
| Tuning range | FM, MW |
| Input Sensitivity (MM) | 2.5mV |
| Signal to noise ratio (MM) | 75dB |
| Signal to noise ratio (line) | 95dB |
| Output | 200mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Total Harmonic Distortion (THD) | 0.09% (20 Hz - 20 kHz, 50 W) |
Covers safe operation regarding power, ventilation, temperature, heat, water, and cleaning.
Warns about electrical hazards like shock, polarized plugs, and enclosure removal.
Safety measures for lightning, outdoor antennas, power lines, and avoiding interference.
Guidelines for damage requiring service, proper servicing, replacement parts, and safety checks.
Precautions regarding AC outlet usage, overloading, and attachments.
Explains how connected KENWOOD components interact for automatic playback.
How to set the impedance selector based on speaker impedance for safe operation.
Explains how connected KENWOOD components interact for automatic playback.
How to set the impedance selector based on speaker impedance for safe operation.
Instructions for connecting loop and outdoor AM antennas for optimal reception.
Guidance for connecting indoor and outdoor FM antennas for stable signal reception.
Identifies and explains the function of each control on the front panel.
Describes the meaning of various indicator lights on the receiver.
Explains the standby mode and how the power switch functions.
Details the functions of various keys on the remote control unit.
Notes that the remote can control other KENWOOD components via system control cords.
Step-by-step guide on how to insert batteries into the remote control.
How to use the remote, its operating range, and potential interference factors.
Steps to turn on the unit and select speaker output settings.
How to select an input source and play the selected audio source.
How to adjust the listening volume using the unit or remote control.
How to adjust bass, treble, and left/right sound balance.
Steps for connecting and using headphones with the receiver.
Steps to select a source and record it onto a cassette deck.
Instructions for copying tapes between TAPE 1 and TAPE 2.
Explains monitoring capabilities when using TAPE 2 (MONITOR) terminals.
Step-by-step guide to tuning and receiving AM/FM broadcast stations.
Procedure for tuning a station and saving it to a preset memory number.
How to recall a single preset station or cycle through all presets.
Steps to reset the microcomputer to resolve operational issues.
Common problems with remote control operation and their solutions.
Solutions for sound output issues, indicator status, hum noise, and radio reception problems.
Explanation of the speaker protection circuit and how to reset it.
Detailed technical specifications for the audio output and input stages.
Technical details for FM and AM tuner performance and reception.
Overall power consumption, dimensions, and weight of the unit.
Technical audio output and input specifications for international models.
Tuner performance details for international models, including frequency ranges.
Overall power consumption, dimensions, and weight for international versions.
