Need help?Do you have a question about the Kenwood KR-V8050 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Input Sensitivity (MM) | 2.5 mV |
| Input Sensitivity (line) | 150 mV |
| Signal-to-Noise Ratio (MM) | 80 dB |
| Signal-to-Noise Ratio (line) | 90 dB |
| Tuning range | FM, MW |
| Frequency Response | 20Hz to 20kHz |
| Speaker load impedance | 8Ω |
| Video Connections | composite |
Essential warnings to prevent fire, electric shock, and ensure safe operation.
Comprehensive safety instructions covering power, ventilation, heat, electric shock, cleaning, and more.
How to connect audio components like tape decks, CD players, turntables.
Step-by-step guide to basic playback, source selection, and volume/tone adjustments.
Guide to tuning and storing FM/AM broadcast stations in memory.
Step-by-step guide to adjusting Dolby PRO LOGIC sound field parameters.
Steps to adjust Dolby 3 STEREO settings and play compatible software.
Common problems and remedies for the remote control and audio output.
Troubleshooting radio reception, interference, and preset station problems.
To Next Page
