Do you have a question about the Kenwood KRF-V8090D and is the answer not in the manual?
stereo operation power output | 100 W + 100 W |
---|---|
surround operation power output (front) | 100 W + 100 W |
surround operation power output (center) | 100 W |
surround operation power output (surround) | 100 W + 100 W |
surround operation power output (surround back) | 100 W + 100 W |
total harmonic distortion | 0.009 % (1 kHz, 50 W, 8 Ω) |
---|---|
frequency response CD/DVD | 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB |
signal to noise ratio PHONO (MM) | 75 dB |
signal to noise ratio CD/DVD | 95 dB |
bass control | ±10 dB (at 100 Hz) |
treble control | ±10 dB (at 10 kHz) |
tuning frequency range | 87.5 MHz ~ 108.0 MHz |
---|---|
usable sensitivity (MONO) | 1.3 µV (75 Ω)/ 13.2 dBf (75 kHz dev, SINAD 30 dB) |
selectivity | 70 dB |
stereo separation | 40 dB |
power consumption | 3.4 A |
---|---|
dimensions | W : 440 mm, H : 166 mm, D : 396 mm |
weight | 12.1 kg |
stereo operation power output | 130 W + 130 W |
---|---|
surround operation power output (front) | 130 W + 130 W |
surround operation power output (center) | 130 W |
surround operation power output (surround) | 130 W + 130 W |
surround operation power output (surround back) | 130 W + 130 W |
total harmonic distortion | 0.009 % (1 kHz, 50 W, 8 Ω) |
---|---|
frequency response CD/DVD | 10 Hz ~ 100 kHz, +0 dB ~ –3.0 dB |
signal to noise ratio PHONO (MM) | 75 dB |
signal to noise ratio CD/DVD | 95 dB |
bass control | ±10 dB (at 100 Hz) |
treble control | ±10 dB (at 10 kHz) |
tuning frequency range | 87.5 MHz ~ 108.0 MHz |
---|---|
usable sensitivity (MONO) | 1.6 µV (75 Ω)/ 15.2 dBf (75 kHz dev, SINAD 30 dB) |
selectivity | 50 dB |
stereo separation | 40 dB |
power consumption | 300 W |
---|---|
dimensions | W : 440 mm, H : 166 mm, D : 396 mm |
weight | 12.1 kg |