Do you have a question about the Kenwood NEXEDGE NX-200 and is the answer not in the manual?
Brand | Kenwood |
---|---|
Model | NEXEDGE NX-200 |
Category | Transceiver |
Language | English |
Important safety information regarding battery pack handling and charging.
Step-by-step guide on attaching and detaching the battery pack.
Overview of the transceiver's display screen and its indicators.
Control for activating programmable functions and selecting channels/groups.
Controls for turning the transceiver on/off and adjusting volume.
Programmable key for accessing functions, often used for emergency.
The primary button used for transmitting.
Key used to access the transceiver's menu system.
Shows when a channel is programmed as priority.
Displays the strength of incoming signals.
Shows the current battery power level.
List of programmable functions available for analog operation.
List of programmable functions for digital NXDN operation.
Specific programmable functions for Analog Conventional mode.
Specific programmable functions for Analog LTR Trunking.
Specific programmable functions for NXDN Conventional mode.
Specific programmable functions for NXDN Trunking.
Further programmable functions for analog operation.
Further programmable functions for digital operation.
Procedures for turning the transceiver on and off.
How to set up and use a password for security.
How to control the audio output level of the transceiver.
Guide to choose the desired operating zone and channel.
General instructions and procedures for sending transmissions.
How to receive transmissions and understand incoming signals.
Steps to navigate and enter the transceiver's menu system.
Table listing available menu items and their functions.
How to use priority channels to monitor specific frequencies.
Steps for making a Selcall voice call.
How to initiate an emergency call.
How to activate encryption for secure communication.
How to adjust the sensitivity for VOX operation.
How to use the hands-free VOX transmission feature.