o
Surveillance <Srvlnc>
Allows you to disable the alert, tone, backlight and LED functions.
o
System Search <Search>
Allows you to view the current Trunking site. With the site displayed, press and hold
the key programmed as [System Search] to enter Search mode. The transceiver
begins searching for a new site and “Search” appears on the display. When a site is
found, searching ends and the transceiver switches to the new site.
o
Talk Around <TA>
Allows you to toggle Talk Around ON and OFF. Talk Around redirects the transceiver
signals directly to other party members rather than relaying the signals through a
repeater.
o
Talkgroup Reset <TG_Rst>
Allows you to reset the Talkgroup ID of a channel.
o
Transceiver Password <Passwd>
Allows you to set a password to lock the transceiver.
o
TX Audio Equalizer (High)
Allows you to set the audio response for high frequencies.
o
TX Audio Equalizer (High Midrange)
Allows you to set the audio response for high midrange frequencies.
o
TX Audio Equalizer (Midrange)
Allows you to set the audio response for midrange frequencies.
o
TX Audio Equalizer (Low Midrange)
Allows you to set the audio response for low midrange frequencies.
o
TX Audio Equalizer (Low)
Allows you to set the audio response for low frequencies.
o
TX Auto Gain Control
Allows you to set the transceiver to automatically adjust the microphone sensitivity
for easy listening.
o
Vibrator <Vib>
Allows you to toggle the vibrator function ON and OFF. When the vibrator is on, the
transceiver will vibrate when a call is received.
o
Zeroize <Zero>
Allows you to delete all the Encryption keys stored in a Secure Cryptographic Module
(SCM).
28
To Next Page
Loading...
Need help?
General
