How to fix Kenwood Transceiver if it will not turn on?
If you cannot turn on your Kenwood Transceiver, it might be due to a dead battery pack. Try recharging or replacing the battery pack. Another possibility is that the battery pack isn't installed correctly; remove it and reinstall it.
How to fix Kenwood Transceiver if I cannot make a selcall?
If you cannot make a selcall on your Kenwood Transceiver, verify and set your transceiver ID (Own, Group, All).
What to do if I cannot hear other group members on my Kenwood NX-P500?
If you cannot talk to or hear other members in your group using the Kenwood Transceiver, ensure you are using the same frequency and QT/DQT or RAN settings as the other group members. Also, check if other group members are using Privacy Talk, and if so, turn on your transceiver’s Privacy Talk. Finally, make sure you are within range of the other transceivers.
Why are there other voices on my Kenwood NX-P500 Transceiver channel?
If voices other than those of your group members are present on the channel of your Kenwood Transceiver, change the QT/DQT or RAN settings. Ensure all group members update their transceiver settings to match the new QT/DQT or RAN setting.
Why does my Kenwood NX-P500 Transceiver battery die quickly after charging?
If your Kenwood Transceiver battery dies shortly after charging, the battery pack life may be finished. Replace the battery pack with a new one.
What to do if my Kenwood NX-P500 only receives selcalls?
If you cannot receive calls except selcalls and cannot transmit even by pressing the PTT switch on your Kenwood Transceiver, the Optional Signaling might be set to "FS (FleetSync)". Change the setting to "oFF (OFF)".
General| Frequency Range | 400-470 MHz |
|---|---|
| Channel Capacity | 64 |
| Number of Channels | 64 |
| Power Output | 5W |
| Digital Protocol | NXDN |
| Ingress Protection | IP54 |
| IP Rating | IP54 |
| Battery Type | Lithium-ion |
| Operating Temperature | -30°C to +60°C |
| Channel Spacing | 12.5 kHz |
| Operating Voltage | 7.4V DC |
Procedures for attaching, detaching, and installing the battery pack.
Step-by-step guide to install the battery pack correctly.
Steps to safely remove the battery pack from the transceiver.
Explains the meaning of different LED indicator colors during charging.
Explains essential controls like Power, Menu, PTT, and other buttons/indicators.
Explains various display indicators and their meanings.
Steps to turn the transceiver on/off and adjust audio volume.
Procedure to change the active channel.
Instructions for making, receiving, and continuing calls.
Status of the LED indicator during transmit/receive.
List of configurable channel settings and their defaults.
How to activate the analog scrambler for privacy.
How to assign the monitor function to buttons.
How to assign Squelch Off function to buttons.
Explanation of QT/DQT for signal filtering.
Steps to select QT/DQT tones or codes.
Setting up Selcall functionality for FleetSync.
Procedure to activate FleetSync signaling.
How to set up your personal ID for Selcalls.
Detailed steps for making individual, group, and broadcast calls.
How to make group calls using Selcall.
How to make individual calls using Selcall.
Steps to make broadcast calls using Selcall.
How to receive and respond to Selcalls.
Setting up Selcall for NXDN, similar to FleetSync.
Procedure to set up own ID for NXDN Selcalls.
How to make group calls in NXDN.
How to make individual calls in NXDN.
Steps for making all group (broadcast) calls in NXDN.
Steps to set up and use the VOX feature.
How to assign the SCAN function to buttons.
How to start and manage channel scanning.
Explanation of the revert channel function during scanning.
How to lock/unlock individual buttons.
How to activate Super Lock for enhanced security.
Overview of the transceiver's setting menu options.
List of available frequencies and their table numbers.
List of functions that can be assigned to buttons.
How to assign the Home Channel function to buttons.
How to operate the Home Channel function.
How to set up the Second PTT function.
How to adjust the VOX gain for sensitivity.
Details how parts operate in Earphone mode.
Explains the battery level indicator display.
How to reset the transceiver to default settings.
To Next Page